HBL430PS2WR

Specifications

Current Interrupting

Certified for current interrupting at full rated current.

Housing

Valox 357

Cord Accommodation

Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.

Pin/Sleeve Spring

Beryllium Copper

Amperage

30A

Certification

UL Listed, UL Standard 1682, UL50 and UL1010 (plugs only), CSA Certified to CSA C22.2 No. 182.1, No.94 and No. 159 (plugs only), UL Listed and CSA Certified Type 4X.

Cord clamp range

.680" To 1.050"

Impact Resistance

Per CSA C22.2 N0. 182.1 / UL1682

Operating Temperatures

Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact, -25° with impact.

Cover Screw/Rivet

Nickel Plated Brass

Insulgrip Grounding Style

Style II

Gland Cap

Rynite SST35

Terminal Screws

Heat treated and Zinc Plated Steel

Flammability

UL 94V-0 and CSA C22.2 No.0.17

Voltage

250V DC/600V AC

Certifications

UL Listed, UL Standard 1682, UL 50, and UL 1010 (plugs only) CSA Certified to CSA Spec. C22.2 No. 182.1, No. 94 and No. 159 (plugs only) UL Listed, CSA Certified Type 4X.

Replacement Interior Number

IN430FS2

Shroud

Aluminum

Product Identification

Identification and ratings are a permanent part of the device housing.

Mounting Screws

Stainless Steel (300 Series)

Ground/Phase Pins

Brass

Max Working Voltage

600V RMS (i.e.minimum creepage distance 10 mm minimum)

Temperature Rise

Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current.

Grommet/Glands

Neoprene

Contact Carrier

Thermoset Polyester

Ground Standoff

Brass

Moisture Resistance

Type 3, 4, 4X per UL 50 and CSA C22.2, No. 94.

Gaskets

Neoprene

Poles and Wires

3 Pole, 4 Wire

Retainer

Thermoset Polyester

Clamp Nut

Nickel Plated Brass

Weight in LBs

1.75

Terminal Accommodations

#10 To #8 AWG copper wire only

Cord Clamp Screws

Stainless Steel (300 Series)

Device

Plug

Lock Ring

Epoxy Painted Aluminum

Cord Grip Retention

Per CSA C22.2 N0. 182.1 / UL1682

Assembly Screws

Stainless Steel (300 series)

Ground Bracket

Nickel Plated Spring Bronze

Hazardous Locations

Plugs Only- Class I, Division I & II, Groups B & C & D and Class II Division I & II, Groups F & G per UL 1010 & CSA 22.2, No. 459.

Service Style

Reversed

Product Type

iec-devices

Cord Clamps

Rynite SST35

Dielectric Withstand Voltage

Withstands 3,000V AC

Arm Spring

Stainless Steel (17-1 Type)

Terminal Identification

Terminals identified in accordance with UL1686 (1, 2, 3, Green).

Endurance

Up to 1,000 connect and disconnect cycles at full rated current and voltage.

Cover

Rynite SST35