HBL460CS1W

Specifications

Hinge Bushing

Aluminum

Voltage

250V DC/600V AC

Pin/Sleeve Spring

Beryllium Copper

Terminal Accommodations

#6 To #4 AWG copper wire only

Spring Guide

Stainless Steel (300 series)

Current Interrupting

Certified for current interrupting at full rated current.

Cord Clamps

Rynite SST35

Ground Bracket

Nickel Plated Spring Bronze

Temperature Rise

Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current.

Certifications

UL Listed, UL Standard 1682, UL 50, and UL 1010 (plugs only) CSA Certified to CSA Spec. C22.2 No. 182.1, No. 94 and No. 159 (plugs only) UL Listed, CSA Certified Type 4X.

Terminal Identification

Terminals identified in accordance with UL1686 (1, 2, 3, Green).

Ground/Phase Pins

Brass

Gland Cap

Rynite SST35

Spring Washer

Stainless Steel (300 series)

Terminal Screws

Heat treated and Zinc Plated Steel

Clamp Nut

Nickel Plated Brass

Max Working Voltage

600V AC RMS (i.e., minimum creepage and clearance distance of 6.4 mm, per UL 1682).

Certification

UL Listed, UL Standard 1682, UL50 and UL1010 (plugs only), CSA Certified to CSA C22.2 No. 182.1, No.94 and No. 159 (plugs only), UL Listed and CSA Certified Type 4X.

Weight in LBs

2.8

Flammability

UL 94V-0 and CSA C22.2 No.0.17

Amperage

60A

Grommet/Glands

Neoprene

Poles and Wires

3 Pole, 4 Wire

Endurance

Up to 1,000 connect and disconnect cycles at full rated current and voltage.

Operating Temperatures

Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact, -25° with impact.

Ground Standoff

Brass

Shroud

Epoxy Painted Aluminum

Product Type

insulgrip-devices

Moisture Resistance

Type 3, 4, 4X per UL 50 and CSA C22.2, No. 94.

Gaskets

Neoprene

Replacement Interior Number

IN460FS1

Retainer

Thermoset Polyester

Cord Clamp Screws

Stainless Steel (300 Series)

Service Style

Standard

Springs, Arm and Wave

Stainless Steel (300 series)

Device

Connector

Dielectric Withstand Voltage

Withstands 3,000V AC

Contact Carrier

Thermoset Polyester

Cover Screw/Rivet

Aluminum

Impact Resistance

Per CSA C22.2 N0. 182.1 / UL1682

Housing

Valox 357

Cord Accommodation

Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.

Cord clamp range

.870" To 1.450"

Cover

Epoxy Painted Aluminum

Product Identification

Identification and ratings are a permanent part of the device housing.

Insulgrip Grounding Style

Style I

Cord Grip Retention

Per CSA C22.2 N0. 182.1 / UL1682