Hubbell Wiring Device-Kellems
HBL5200CS1W
The interchangeable product line, INSULGRIP pin and sleeve features metallic where you want it and non-metallic where you need it. Two different grounding styles are available.
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Specifications
- Housing
- Epoxy Painted Aluminum
- Terminal Accommodations
- #1 To #250 KCMIL copper wire only
- Spring Guide
- Stainless Steel (300 series)
- Cord clamp range
- 1.00" To 2.50"
- Poles and Wires
- 4 Pole, 5 Wire
- Moisture Resistance
- Type 3, 4, 4X per UL 50 and CSA C22.2, No. 94.
- Service Style
- Standard
- Insulgrip Grounding Style
- Style I
- Impact Resistance
- In accordance with UL746C
- Grommet/Glands
- Neoprene
- Ground Bracket
- Nickel Plated Spring Bronze
- Cord Clamps
- Epoxy Painted Aluminum
- Product Identification
- Identification and ratings are a part of the external label and molded into the receptacle mount.
- Spring Washer
- Stainless Steel (300 series)
- Ingress Protection
- IP66 Suitability
- Cover Screw/Rivet
- Aluminum
- Temperature Rise
- Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current.
- Ground Standoff
- Brass
- Voltage
- 250V DC/600V AC
- Cord Clamp Screws
- Stainless Steel (300 Series)
- Gland Cap
- Epoxy Painted Aluminum
- Springs, Arm and Wave
- Stainless Steel (300 series)
- Ground/Phase Pins
- Brass
- Contact Carrier
- Thermoset Polyester
- Terminal Screws
- Heat treated and Zinc Plated Steel
- Assembly Screws
- Stainless Steel (300 series)
- Certification
- UL Listed, CSA Certified
- Current Interrupting
- Certified for current interrupting at full rated current.
- Hinge Bushing
- Aluminum
- Flammability
- UL94-5VA and V-0 classification.
- Short Circuit Withstand
- Suitable for use on a circuit capable of delivering not more than 10,000 RMS symmetrical amperes at the voltage rating of the receptacle.
- Device
- Connector
- Certifications
- UL Listed, CSA Certified.
- Cord Grip Retention
- Per CSA C22.2 N0. 182.1 / UL1682
- Max Working Voltage
- 600V AC RMS
- Operating Temperatures
- Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact.
- Retainer
- Thermoset Polyester
- Gaskets
- Neoprene
- Product Type
- insulgrip-devices
- UV Resistance
- All materials are UV Stabilized.
- Pin/Sleeve Spring
- Beryllium Copper
- Weight in LBs
- 14.4
- Dielectric Withstand Voltage
- Withstands 3,000V AC
- Endurance
- Mechanical: 10,000 cycles, Electrical: 6,000 cycles.
- Cover
- Epoxy Painted Aluminum
- Hinge Spring
- Stainless Steel (300 series)
- Replacement Interior Number
- IN5200FS1
- Terminal Identification
- Terminals identified in accordance with UL1682 (1, 2, 3, Green).
- Amperage
- 200A
- Cord Accommodation
- Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.
Related products
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther