Hubbell Wiring Device-Kellems
HBL530B7W
Every Hubbell non-metallic Pin and Sleeve product is designed to meet the International Standard IEC 60309-1 and IEC 60309-2. This device standard calls out singly rated, non-interchangeable configuration for every voltage and type of service.
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Specifications
- Terminal Identification
- Terminals identified in accordance with North American and International conventions.
- Flammability
- UL94-5VA and V-0 classification.
- Assembly Screws
- Stainless Steel (300 series)
- Product Type
- iec-devices
- Lock Ring
- Rynite SST35
- Service Style
- Standard
- Voltage
- 3 Phase Y 277/480V
- Housing
- Zytel 101 Nylon
- Color
- red
- Ingress Protection
- IP67 Suitability
- Dielectric Withstand Voltage
- Withstands 3,000V AC
- Amperage
- 30A
- Certifications
- UL Listed, CSA Certified.
- Max Working Voltage
- 600V AC RMS
- Retainer
- High-Impact Thermoset
- Gaskets
- Neoprene
- Mounting Screws
- Stainless Steel (300 Series)
- Device
- Inlet
- Poles and Wires
- 4 Pole, 5 Wire
- Impact Resistance
- In accordance with UL746C
- Endurance
- Mechanical: 10,000 cycles, Electrical: 6,000 cycles.
- Contact Carrier
- High-Impact Thermoset
- Temperature Rise
- Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%.
- Terminal Screws
- Stainless Steel (300 series)
- IEC Product Type
- Watertight
- Certification
- UL Listed, CSA Certified
- Terminal Accommodations
- #12 To #8 AWG copper wire only
- Ground/Phase Pins
- Brass
- Short Circuit Withstand
- Suitable for use on a circuit capable of delivering not more than 10,000 RMS symmetrical amperes at the voltage rating of the receptacle.
- Moisture Resistance
- Watertight per IEC 60309-1
- Weight in LBs
- 1.2
- Hinge Spring
- Stainless Steel (300 series)
- Mounting Flange
- Zytel 101 Nylon
- Operating Temperatures
- Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact.
- Current Interrupting
- Certified for current interrupting at full rated current.
- UV Resistance
- All materials are UV Stabilized.
- Replacement Interior Number
- IN530EM
- Product Identification
- Identification and ratings are a part of the external label and molded into the receptacle mount.
Related products
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther