Hubbell Wiring Device-Kellems
HBL560P7W
Every Hubbell non-Metallic Pin and Sleeve product is designed to meet the International Standard IEC 60309-1 and IEC 60309-2. This device standard calls out singly rated, non-interchangeable configuration for every voltage and type of service.
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Specifications
- Grommet/Glands
- Solid Neoprene
- Operating Temperatures
- Maximum Continuous: 75° C; Minimum Continuous: -40° C w/o impact.
- Weight in LBs
- 2.35
- Contact Carrier
- High-Impact Thermoset
- Flammability
- UL94-5VA and V-0 classification.
- Endurance
- Mechanical: 10,000 cycles, Electrical: 6,000 cycles.
- Terminal Identification
- Terminals identified in accordance with North American and International conventions.
- Amperage
- 60A
- Product Identification
- Identification and ratings are a part of the external label and molded into the receptacle mount.
- Cord Clamp Screws
- Stainless Steel (300 Series)
- Lock Ring
- Rynite SST35
- Cord Accommodation
- Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No. 49 and the harmonized European Standards.
- Gaskets
- Neoprene
- Terminal Screws
- Stainless Steel (300 series)
- Product Type
- iec-devices
- Retainer
- High-Impact Thermoset
- Moisture Resistance
- Watertight per IEC 60309-1
- Clamp Nut
- Nickel Plated Brass
- Dielectric Withstand Voltage
- Withstands 3,000V AC
- Device
- Plug
- Temperature Rise
- Max 30° C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of 75%.
- Cord Grip Retention
- Per CSA C22.2 No. 182.1 / UL1682.
- Gland Cap
- Rynite SST35
- Max Working Voltage
- 600V AC RMS
- Housing
- Zytel 801 Nylon
- Assembly Screws
- Stainless Steel (300 series)
- Certifications
- UL Listed, CSA Certified.
- Service Style
- Standard
- Ground/Phase Pins
- Brass
- UV Resistance
- All materials are UV Stabilized.
- Current Interrupting
- Certified for current interrupting at full rated current.
- Impact Resistance
- In accordance with UL746C
- Terminal Accommodations
- #8 To #2 AWG copper wire only
- Poles and Wires
- 4 Pole, 5 Wire
- Ingress Protection
- IP67 Suitability
- Cord clamp range
- .500" To 1.450"
- Certification
- UL Listed, CSA Certified
- Color
- red
- IEC Product Type
- Watertight
- Voltage
- 3 Phase Y 277/480V
- Short Circuit Withstand
- Suitable for use on a circuit capable of delivering not more than 10,000 RMS symmetrical amperes at the voltage rating of the receptacle.
- Replacement Interior Number
- IN560EM
- Cord Clamps
- Rynite SST35
- Hinge Spring
- Stainless Steel (300 series)
Related products
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther