Accessori generali

The fixing base is part of the Harmony XVB range, intended for use with 70 mm beacons and indicator banks. It consists of a black plastic fixing plate and a Ø 25 mm aluminium support tube , ensuring…

The shaft extension is specifically crafted for TeSys Vario switch bodies, covering models V3 through V6. This component facilitates the operation of a switch mounted at the rear of an enclosure…

The complete beacon is designed for use as a lighting accessory in tower light applications. It utilizes a flash discharge tube to produce a strobe light, providing clear status indication for…

The NFC fuse cartridge is specifically designed for use with TeSys GS switch-disconnector fuses, providing essential protection against thermal overloads and magnetic overcurrents in standard…

This product is part of the Harmony XAC range, an offer of pendant control stations for Ø22mm plastic signalling units. This single isolating block for control circuit. It has 3 normally closed…

The PM5563 is a DIN-mounted energy meter optimized for power monitoring applications. It adheres to the Class 0.2S accuracy standard as per IEC 62053-22 and provides a sampling rate of 128 samples…

The product is a 60mm plinth intended for compatibility with PanelSeT PLA enclosures . With a height of 60mm and a depth of 1270mm , this plinth serves versatile applications. The assembly includes…

This set includes five G2 filters crafted from polyurethane foam, specifically intended for the ClimaSys CU cooling unit range. Each filter is compatible with side-mounting cooling units rated at…

This product features a handle with a masking plate designed for use with the 3VA1/2 series circuit breakers, accommodating ratings of 125A for both 3VA51 and 3VA61, and 250A for 3VA62. The structure…

This flexible core current transducer is designed for retrofit applications, supporting a line rated current range of 50A to 5000A . It can be wrapped around cables with a maximum outer diameter of…

The door cross rails are specifically designed for Spacial SF and SM enclosures, featuring a nominal width of 400 mm. These components are directly mounted on the door reinforcement frame and are…

The iEM3555 energy meter is part of the Acti9 series, engineered for precise energy monitoring in three-phase applications. It supports four tariff schedules and is suitable for sub-billing tasks…

The Linergy TR marking card is designed for use with terminal blocks and features a white background. This marking accessory includes six strips, each measuring 8mm, and is unmarked, allowing for…

The TOP4GS7/90 7.62 OR features printed circuit board terminals designed for efficient connectivity in various applications. With a pitch of 7.62 mm and a 90° conductor outlet direction, this…

The Coupler connector SF-5EP1N8A90A2 features a straight short design suitable for both standard and SPEEDCON interlocks, accommodating M23 connections. It provides a total of 5+PE positions with…

The Coupler connector ST-5ES1N8A9003S is engineered with a straight design suitable for both standard and SPEEDCON interlock applications. It features a total of 5+PE positions, ensuring versatility…

The CA-12P1N12HZ00 is an M23 device connector designed for rear wall mounting, providing a reliable solution for various signal applications. This unit is equipped with a straight design and shielded…

The feed-through header, designated as DFK-MSTBA 2,5/ 9-GF-5,08 , is designed for use in various electrical applications. It possesses a nominal cross section of 2.5 mm² and allows for a maximum…

The End Cover for 161 mm Profile Housing is tailored for use with profile housings, specifically those with an internal width of 161 mm. This component includes screws and a seal, ensuring secure and…

The ME 22,5 OT-MKDSO GN serves as the upper part of a DIN rail housing, specifically intended for PCB terminal blocks with screw connections. It measures 22.6 mm in width, 99 mm in height, and 45.85…