Accessori generali

The membrane keypad, designated as KP HCS T-MIC K12 C3 P9 , is designed for handheld applications. It utilizes silver conduction technology, ensuring reliable operation across a temperature range of…

The device marker, designated as LS-EMLP (11X9) YE , is designed for versatility in labeling applications. It features a sheet format with a vibrant yellow color (RAL 1018) and allows for direct…

The device marker, identified by the designation code LS-EMLP (45X15) SR, is designed for various labeling applications. This product comes as a sheet of silver-colored ABS material, featuring an…

The MINI MCR-2-I-I-ILP-PT operates as a 1-channel input loop-powered isolator designed for the electrical isolation of analog signals, facilitating a direct signal transmission from input to output…

The PP-H 2,5/11 plug operates at a nominal voltage of 500 V and supports a nominal current of 24 A. It utilizes a push-in connection method, allowing for straightforward installation and secure…

The test terminal strip, designated as PTRE 6-2/23 , operates at a nominal voltage of 400 V. It features a push-in connection method and is designed for single-level mounting on a DIN rail. The rated…

The SACC-M 8MS-4QO-0,25-M is a universal connector designed for M8 applications, featuring a straight plug configuration with A-coding. It accommodates 4 positions and is suitable for a range of…

The SACC-PO12MS-5CT-CM SH is a universal connector designed for reliable connectivity in various applications. It features a 5-position, shielded configuration with a straight M12 Push-Pull design…

The SD-FLASH-2GB-EV-EMOB serves as a vital storage medium for program and configuration data, enabling seamless integration with the PLC's file system. With a capacity of 2 GB, it accommodates…

The coupler connector is a straight type with a screw locking mechanism, identified by the designation code SL-7EP1N8A9001. It is equipped with M58 threading and provides a connection profile of…

The coupler connector, designated as SM-5EP1N8A9004 , features a straight short design equipped with a screw locking mechanism. It is constructed to accommodate a cable diameter range of 17 mm to 21…

The SPDB 2,5/ 1-M plug is designed for efficient connectivity with a nominal voltage rating of 500 V and a maximum load current of 24 A. It supports a rated cross-section of 2.5 mm², while…

The US-EMP (27X15) snap-in markers are designed for custom labeling applications. These markers are provided on cards and are characterized by their ability to be snapped into marker carriers…

The US-EMSP (90X60) SR CUS device marker is designed for customizable labeling, available in a silver finish that can be tailored to specific requirements. With dimensions of 90 mm in width and 60 mm…

The Type 2 surge arrester VAL-SEC-T2-2+0-120DC-FM is engineered for integration into DC power systems, complying with IEC test classification II and EN type T2 . It features a two-section DIN rail…

Schneider Electric TeSys D Mounting Kit is designed specifically for star-delta starter assembly with Schneider Electric's 3-pole contactors LC1D09-D38. This kit is ideal for motor applications up to…

The Miniature Circuit Breaker (MCB) is designed for current limiting applications and features dual tripping mechanisms: a delayed thermal mechanism for overload protection and an electromechanical…

The SACC-M12FS-5CON-PG9-M is a universal connector designed for versatile applications, featuring a 5-position configuration. This socket connector utilizes a straight M12 A-coded design with a screw…

The CR-P/M 42 module serves as an accessory for interface relays in the CR-P and CR-M series, enabling enhanced functionality through its pluggable design. This module incorporates reverse polarity…

The Feed-through header DFK-IPC 16/ 9-G-10,16 features a nominal cross section of 16 mm² and is designed for applications requiring a nominal current of 76 A. It operates at a rated voltage of 1000 V…