Bosch Rexroth Ricambi per Automazione Industriale

TRANSVERSE GEARBOX 4ULG SZ4 - The transverse gearbox shortens the length of your tightening spindle by the installation length of the EC motor plus the installation length of the transverse gearbox.

ANGLE HEAD 2W011 SZ2 1/4"SQ - Working range 2.2-11 Nm - Max. output drive speed: 1000 rpm - For restricted accessibility - Precision interlocking for high torque accuracy - Positionable in increments…

TRANSVERSE GEARBOX 5ULG SZ5 - The transverse gearbox shortens the length of your tightening spindle by the installation length of the EC motor plus the installation length of the transverse gearbox.

ANGLE HEAD 4W130 SZ4 1/2"SQ - Working range 26-220 Nm - Max. output speed: 985 1/min - For restricted accessibility - Precision interlocking for high torque accuracy - Positionable in increments (10°…

STRAIGHT OUTPUT ESISA012 E 1/4"SQ - Straight output drives form a straight nutrunner from the ErgoSpin VarioLine. Whether suspended vertically, as a hand-held straight nutrunner, as a hand-guided…

ADAPTER ESOA025 E SZ3 - With the output drive adapters, you can combine the ErgoSpin VarioLine with output drives in sizes 2, 3, and 4, for tightening spindles and e.g. use it as a tightening…

ADAPTER ESOA146 E SZ4 - With the output drive adapters, you can combine the ErgoSpin VarioLine with output drives in sizes 2, 3, and 4, for tightening spindles and e.g. use it as a tightening…

ADAPTER ESOA012 E SZ2 - With the output drive adapters, you can combine the ErgoSpin VarioLine with output drives in sizes 2, 3, and 4, for tightening spindles and e.g. use it as a tightening…

ADAPTER ESOA050 E SZ3 - With the output drive adapters, you can combine the ErgoSpin VarioLine with output drives in sizes 2, 3, and 4, for tightening spindles and e.g. use it as a tightening…

ADAPTER ESOA073 E SZ4 - With the output drive adapters, you can combine the ErgoSpin VarioLine with output drives in sizes 2, 3, and 4, for tightening spindles and e.g. use it as a tightening…

TRANSVERSE GEARBOX 2ULG SZ2 - The transverse gearbox shortens the length of your tightening spindle by the installation length of the EC motor plus the installation length of the transverse gearbox.

CONTROL UNIT SE352M W/ SLOT - To control and monitor the tightening process of up totwo independent tightening channels per control unit - For hand-held nutrunners and stationary spindles - Carries…

SINGLE CONTROLLER CS351E-G - Compact system CS351 for controlling a tightening channel - CS351S for controlling a tightening spindle - CS351E for controlling an ErgoSpin hand-held nutrunner - Version…

INTERFACE MODULE IMDEV - DeviceNet

INTERFACE MODULE IMMTCP - Modbus TCP

SINGLE CONTROLLER CS351E-D IL - Compact system CS351 for controlling a tightening channel - CS351S for controlling a tightening spindle - CS351E for controlling an ErgoSpin hand-held nutrunner…

SINGLE CONTROLLER CS351S-G IL - Compact system CS351 for controlling a tightening channel - CS351S for controlling a tightening spindle - CS351E for controlling an ErgoSpin hand-held nutrunner…

SINGLE CONTROLLER CS351E-D NK - Compact system CS351 for controlling a tightening channel - CS351S for controlling a tightening spindle - CS351E for controlling an ErgoSpin hand-held nutrunner…

SINGLE CONTROLLER CS351S-D NK - Compact system CS351 for controlling a tightening channel - CS351S for controlling a tightening spindle - CS351E for controlling an ErgoSpin hand-held nutrunner…

SINGLE CONTROLLER CC-CS351E-D - For CC-ErgoSpin hand-held nutrunner control - Use for functionally critical class B and C tightening processes in compliance with VDI/VDE 2862 - Compact and…