Accessori generali Phoenix Contact

The device connector, designated as SF-7EP1N8AWK00 , is designed for front mounting and features a straight low type configuration. It utilizes a screw locking mechanism and adheres to the M23…

The RF-12P2N8AWV00 is designed for front mounting applications, utilizing a straight configuration with a screw locking mechanism. This connector incorporates 12 pin positions and employs a crimp…

The DFK-PC 5/ 9-G-7,62 is a feed-through header designed for efficient electrical connections. It features a nominal cross section of 6 mm² and is rated for a nominal current of 41 A and a rated…

The MSTBU 2,5/ 3-STD-5,08 connector is designed for direct mounting and offers a nominal current of 12 A and a rated voltage of 320 V (III/2). The connection method employs a screw connection with a…

The DFK-MSTBA 2,5/ 3-GF-5,08 is a feed-through header optimized for connections requiring a nominal current of 12 A and operating at a rated voltage of 320 V. With a compact design featuring a…

The FMC 1,5/13-ST-3,5-RF is designed for printed-circuit board applications, providing a reliable connection with a nominal cross section of 1.5 mm². The connector is capable of handling a nominal…

The FMC 1,5/18-STF-3,5 is a printed-circuit board connector characterized by its 1.5 mm² nominal cross section and green housing. It is capable of handling a nominal current of 8 A and operates at a…

This pin strip, identified by the Designation Code PSTD 0,65X0,65/9-2,54, is constructed in black and utilizes a male connector type. It supports 18 potentials distributed over 2 rows, with a total…

The surge protective device, designated as VAL-MS 320/3+1/FM , is a 4-channel module intended for installation on a DIN rail measuring 35 mm. It operates at a voltage of 230 V AC and incorporates a…

This plug, designated as UP 4/13 , is designed for applications requiring a nominal voltage of 800 V and a maximum load current of 32 A when using a conductor cross-section of 6 mm². The product…

The test terminal strip, designated as UTWE 6-2/G19 , is engineered for wall mounting applications. It supports a nominal voltage of 400 V and utilizes a screw connection method. The rated cross…

The Test Terminal Strip UTRE 6-2/I19 is designed for use in various electrical applications. It accommodates a nominal voltage of 400 V and utilizes a screw connection method for secure wiring. This…

The UTRE 6-2/20 is a test terminal strip characterized by its nominal voltage rating of 400 V and a screw connection method. It supports a rated cross section of 6 mm², with a versatile connection…

The DFK-MSTB 2,5/10-G-5,08 is a feed-through header designed for direct mounting in electrical applications. It supports a nominal current of 12 A and a rated voltage of 320 V, making it suitable for…

The printed-circuit board connector designated as PC 6/ 5-GL3U-7,62 is designed with a nominal cross section of 6 mm² and is characterized by its green color. It supports a nominal current of 41 A…

The Fuse Plug P-FU 6,3X32 LED 24 is designed for use with G / 6,3 x 32 cartridge fuses, featuring a nominal current rating of 10 A. Prior to replacing the fuse, it is essential to disconnect the fuse…

The LED machine light, designated as PLD M 260 W-85/95 540/D40/SC , operates on a supply voltage of 24 V DC and offers an emission angle of 85 °/95 °. With dimensions of 540 mm in length and a…

The PRC ED-T 1I5/2O5-4-HR-GN serves as a power distributor within the PRC 35 range, characterized by its black polycarbonate fiber reinforced housing. This model supports a maximum conductor cross…

This test terminal strip, designated as PTRE 6-2/21 , operates at a nominal voltage of 400 V and features a push-in connection method. It supports a rated cross section of 6 mm², with the ability to…

The product is a directional antenna designated as RAD-ISM-900-ANT-YAGI-3-N, designed for operation within the 868 MHz to 900 MHz frequency range. It features a gain of 5 dBi and utilizes linear…