Utensili e accessori Phoenix Contact

The 0,5/14-ST-2,54 C1 PCB connector is designed for applications requiring reliable electrical connections. With a nominal current rating of 6 A and a rated voltage of 160 V (III/2), this connector…

The SMD male connector is designed for precise electronic applications, accommodating a nominal current of 1.4 A and a test voltage of 500 V AC . It features 80 positions arranged with a 1.27 mm…

The termination resistor, designated as FL LCX 50-OHM-RSMA , is specifically designed to be screwed onto an unused antenna connection in WLAN devices, particularly useful in leaky wave applications…

The 0.5 mm² PCB connector is designed for reliable connections in electronic applications. It supports a nominal current of 6 A and a rated voltage of 160 V (III/2) . This connector features a gold…

The FRONT-MC 1,5/19-STF-3,81 is designed for PCB applications with a nominal cross section of 1.5 mm² and supports a maximum current of 8 A. The connector is colored green and features a tin contact…

The device marker, designated as LS-EMSP-AL (75,6X54), is constructed from aluminum and is presented in an aluminum color. It is an unlabeled marker that can be customized using TOPMARK NEO or…

The QC 0,5/13-STF-3,81 is a printed circuit board connector characterized by its green housing and a nominal current rating of 6 A . It operates at a rated voltage of 200 V under category III/2…

The device connector is designed for rear mounting and features a 4-position flush-type male connector adhering to M12 standards. The cable length is 0.5 m, utilizing individual wires with a…

This contact insert is part of the VARIOCON range and is constructed from polyamide with a light grey finish. It accommodates up to 6 positions and is rated for a maximum voltage of 250V and a…

The MNT-TAE D/WH is engineered to safeguard the power supply and signal connections of end devices equipped with either analog or digital telecommunications interfaces. This surge protection device…

The potential distributor is designed for efficient electrical connectivity with a nominal voltage rating of 250 V and a nominal current capacity of 17.5 A . It features a push-in connection method…

This rear mounting device connector is designed for Ethernet CAT5 applications, conforming to IEC 11801:2002 standards. It features an 8-position flush-type female connector with a hybrid M12…

The CA-17S1N8A9006 coupler connector is engineered for reliable connectivity in various applications. This M23 connector is designed with 17 positions and features a straight, shielded configuration…

The CA-16S1N1290DN is a robust M23 coupler connector designed for secure electrical connections. Its straight configuration and shielding ensure reliable performance, making it suitable for both…

The ME 45 UTG/FE1 KMGY is a robust DIN rail housing designed for versatile applications. It consists of a lower housing part that incorporates a metal foot catch and is equipped with an FE contact…

The P-FU 5X20 LED 60 is a robust fuse connector suitable for use with G / 5 x 20 cartridge fuses. It is essential to disconnect the fuse connector from the basic terminal block before replacing the…

The PST 1,3/10-5,0 pin strip connector is designed for efficient electrical connections, boasting a nominal cross section of 1.5 mm² and a maximum current rating of 12 A, which is contingent on the…

The SW SUITE DEMO serves as a robust configuration and diagnostic software solution tailored for the Automation Worx automation system. This suite includes an array of integrated tools such as PC…

The conductor marking sheet is designed for effective wire identification and is presented in a yellow color. This unlabeled sheet can be utilized with several labeling technologies including TOPMARK…

The panel feed-through is designed for robust applications, featuring SPEEDCON locking for secure connections. It utilizes an M17 configuration with 17 pin contacts , ensuring reliable electrical…