Altro Schneider Electric

This limit switch is categorized under the Nema Limit Switches range and functions by converting mechanical motion into an electrical control signal. It features a single pole double throw, double break, form Z, snap action contact configuration, facilitating actuation in both clockwise and counterclockwise directions.The device is equipped with a rotary head and operates without an operating lever, supporting lateral approach. It supports a rated voltage of 600V AC and a maximum operating current of 20A, making it suitable for various industrial applications.Constructed from cast zinc, the fixed body measures 57.15mm in width, 61.98mm in depth, and 118.36mm in height, with a net weight of 1.13kg. The limit switch is designed to withstand harsh environments, rated IP67 and NEMA 1/2/4/12/13, ensuring protection against dust and water ingress. The 9007 series is particularly suited for severe duty applications, including those within mill and foundry contexts, and is compatible with a variety of electrical connections using screw clamp terminals.With a maximum displacement angle of 89°, this switch allows for precise control, maintaining a repeat accuracy of +/- 0.004 inches over a linear travel of 1.5 inches on the lever arm. The device offers a maximum actuation speed of 130 ft/min with a 30° cam angle, ensuring rapid response times in operational settings. The protective treatment includes corrosion-resistant gray paint, enhancing durability in challenging conditions.

The XUSL series safety light curtain, designated as type 4, is specifically developed for hand detection near dangerous machinery. This model incorporates 38 beams and is capable of operating over a sensing range of 3 to 17 meters when properly cabled. With a height protection of 760 mm, it is suitable for various applications including robotic systems and mechanical presses.Equipped with two PNP solid-state OSSD safety outputs and a rated supply voltage of 24V DC, the device consumes a maximum current of 2A. The design includes a durable PMMA tube and a 316L stainless steel sealing plug, ensuring reliable performance in demanding environments. The unit is also IP69K rated, making it resistant to high-pressure water and dust ingress.This safety light curtain features a heating system to maintain operational integrity in extreme conditions, with an ambient temperature range of -30 to 55 °C. It utilizes a test and muting function via an external safety module, enhancing usability. The unit is equipped with several connectivity options, including a 5-pin M12 male connector for the transmitter and an 8-pin M12 male connector for the receiver.Additionally, the product is compliant with various safety standards, including CE and TÜV certifications, ensuring it meets stringent operational criteria. The kit includes an adjustable mounting bracket, one transmitter, one receiver, and necessary documentation, all designed to facilitate straightforward installation and operation.

The Preventa XCS Key Operated Safety Switch is engineered for secure control over machinery, particularly for guard doors. With its adjustable turret head and a robust Zamak body, this safety switch facilitates simplified installation through a single cable gland entry. It is rated at IP67, making it suitable for use in challenging environments.Designed to adhere to stringent safety standards, this switch achieves category 4 performance level PL e and SIL 3 compliance when wired according to the relevant guidelines. This ensures a reliable

This limit switch belongs to the XC Standard range and features a metal end plunger with a nitrile boot. It includes both 1 normally closed and 1 normally open snap action contact with positive opening operation, ensuring reliable performance in various industrial applications.With an operational current rating of 1.5A at 240V AC and 0.1A at 250V AC, this switch is equipped with a removable cable connector for simplicity in electrical connections. It complies with IP66, IP67, and IP68 ratings, providing protection against dust and water ingress, while also meeting IK06 impact resistance standards.The device is designed for vertical approach in one direction and is built with a fixed type body made of Zamak, measuring 30mm in width, 16mm in depth, and 50mm in height, with a weight of 0.18 kg. It offers mechanical durability of approximately 10 million cycles and electrical durability up to 5 million cycles, making it suitable for a wide range of applications, including packaging, materials handling, and food processing.The limit switch is certified by UL, CSA, and CCC, adhering to standards such as UL 508, EN/IEC 60947-5-1, and CSA C22.2 No 14. Additionally, it features a modular design for enhanced maintenance ease.

This limit switch is a member of the XC Standard series, specifically designed to transform mechanical motion into an electrical control signal. The device operates with 1 NC + 1 NO snap action contacts, ensuring reliable performance with positive opening operation.The switch incorporates a thermoplastic roller lever that utilizes a spring return mechanism, allowing for lateral approach in one or two programmable directions. Notably, the operating head moves in a rotary manner, enhancing its versatility. It is equipped with screw clamp terminals for electrical connections and features a tapped entry for PG13.5 cable gland.Rated for IP66, IP67, and IK05 protection, this switch is durable under various environmental conditions. It supports a rated operational current of 3A at 240V AC and 0.27A at 250V AC. The conventional enclosed thermal current is 10A, and it boasts a mechanical durability of approximately 20 million operating cycles, with an electrical durability of 5 million cycles. The device has a fixed body made of plastic, with dimensions of 40mm (Width) x 60mm (Depth) x 130mm (Height) and a weight of 0.16kg.This limit switch is suitable for a wide range of industrial applications, including packaging, materials handling, conveying, machining, and food and beverage processing. It complies with multiple standards such as IEC 60947-5-1 and EN 60947-5-1, and is certified by UL, CCC, and CSA, ensuring its reliability and safety in operational environments.

The limit switch body ZCMD is designed with a zamak construction, incorporating 2 normally closed (NC) and 2 normally open (NO) snap action contacts. It supports compatibility with a variety of heads and actuators from the XCKD, XCKP, and XCKT ranges. This unit is pre-cabled with a 5-meter fixed cable, ensuring ease of installation in various applications.With a height of 50 mm and a compact design, this miniature limit switch body is rated for electrical durability of 5,000,000 cycles across multiple voltage specifications including 24 V, 48 V, and 120 V. The unit features a rated insulation voltage of up to 400 V and is equipped with a short-circuit protection of 6 A. Its silver-plated contacts offer reliable performance, and the product is designed to operate under ambient temperatures ranging from -40 °C to 70 °C.In addition to its technical capabilities, the ZCMD limit switch body adheres to various environmental standards, including compliance with the EU RoHS directive and sustainable product classifications. The associated designation code is ZCMD, making it a versatile choice for industrial automation applications.

This power distribution module is part of the Modicon TM5 range and features a rated supply voltage of 24V DC. It is designed to provide 6.3 A of current for I/O power segments, making it suitable for integration in various automation solutions.With a maximum power dissipation of 0.8W, this module supports a flexible and scalable I/O configuration, enabling efficient operation within production and packaging machinery, as well as material handling and assembly systems. The module incorporates a 6.3 A internal fuse for short-circuit protection and is rated IP20.The housing of the module is colored grey and has a weight of 0.03 kg. It meets several industry standards including IEC 61131-2, UL 508, and CSA C22.2 No 213, and is certified by GOST-R, C-Tick, cULus, and CSA.For installation, the module mounts on a 35mm DIN rail, ensuring compatibility with Modicon M258 and Modicon LMC058 controllers. The operational temperature range is -10 to 55 °C without derating, making it versatile for various environments.

The Modicon STB mounting base serves as a foundational component for the Modicon STB distributed I/O solution, facilitating the installation of compatible I/O modules. With a width of 13.9 mm, a height of 128.3 mm, and a depth of 70 mm, this base is optimized for mounting on DIN rail systems. Weighing 0.024 kg, it is suitable for various industrial environments including packaging, bottling, assembly, distribution, textile, printing, and semiconductor applications.The base is compatible with a range of modules, such as STBDDO3605 and STBDDI3230, ensuring flexibility in system design. Additionally, it meets several sustainability standards, being compliant with the China RoHS Regulation and featuring proactive compliance with the EU RoHS Directive. It is free from substances of very high concern according to REACH regulations and carries a warning for potential exposure to lead, which is known to cause health issues in California.Designed to simplify maintenance and diagnostics, the Modicon STB range enhances operational efficiency throughout its product life cycle. As part of the mounting accessories category, it is classified specifically as a base destined for I/O modules.

The Multi9 C60BP is designed as a low voltage miniature circuit breaker (MCB) that provides essential protection for electrical systems. This device features two protected poles and is rated for a current of 30A. With a D curve tripping characteristic, it is suitable for a variety of applications. Its rated short circuit breaking capacity reaches up to 10kA at 415VAC, conforming to EN/IEC 60947-2 standards, making it effective in managing electrical faults. The MCB also adheres to both industrial (EN/IEC 60898-1) and residential safety standards (EN/IEC 60947-2), ensuring compliance across various environments. Engineered for original equipment manufacturers (OEM) and control panel builders, the C60BP offers significant durability, with an electrical endurance of up to 10,000 cycles and a mechanical endurance of 20,000 cycles. The operating voltage is rated at 240VAC, with an insulation voltage of 500VAC and a withstand voltage of 6kV, providing robust protection against surges. The device is mountable on a DIN rail and measures 36mm in width, 103mm in height, and 72mm in depth. It operates effectively within an ambient temperature range of -30°C to 70°C and can be stored at temperatures as low as -40°C and as high as 80°C. The product features an IP20 rating for terminal protection, ensuring safety in various operational contexts.

The terminals for M9XU comb busbar are designed to accommodate rigid or flexible cables with cross-sections ranging from 6mm² to 35mm². These connectors are compatible with the C60BP device, ensuring a secure connection. With a tightening torque specification of 3.5 N·m, these connectors facilitate reliable assembly while adhering to standards such as UL 486E and EN/IEC 61439-1. The rated insulation voltage for this product is 1000 V, and it supports a line-rated current of up to 63 A. The color of the connectors is white (RAL 9001), making them suitable for various applications. This product falls under the Multi9 range and includes a total of four connectors in each set.

The electronic pressure sensor XM, designated as XMLG, is designed for precise pressure measurement with a range of 0 to 25 bar. It accommodates a maximum accidental pressure of 56 bar and a destruction pressure of 62.5 bar, ensuring reliability in various applications. The sensor is equipped with a G 1/4 A (male) fluid connection suitable for air, fresh water, hydraulic oils, and refrigeration fluids, operating effectively within a temperature range of -15 to 125 °C.Electrical connectivity is facilitated through a 3-pin M12 male connector, delivering a 4...20 mA analog output signal with a current consumption of less than 20 mA. Its rated supply voltage operates at either 12 V DC or 24 V DC, with permissible limits between 8 V and 33 V. The sensor's mechanical durability is rated for up to 10 million cycles, making it suitable for demanding industrial applications.Constructed with a metal body and a stainless steel 303 fluid entry, the sensor measures 22.8 mm in diameter and 58.1 mm in height, weighing 0.095 kg. It adheres to several safety and performance certifications including CSA C22.2 No 14, EAC, UL 508, and CE, complying with EN/IEC 61326-2-3 standards. The sensor is rated IP66, IP67, and NEMA 4, providing substantial protection against environmental factors.

The ZCT limit switch body is designed for compatibility with heads, actuators, and connectors from the XCKD, XCKP, and XCKT series. It utilizes a plastic body and incorporates a Pg 11 cable gland for robust connection options.Featuring a combination of 1 normally closed and 1 normally open (1 NC + 1 NO) contact configuration, this device operates on a slow-break mechanism, ensuring reliable switching performance. The assembly is capable of supporting high electrical durability, rated for 5,000,000 cycles at various voltages, from 24 V to 120 V, under specific conditions as outlined in IEC 60947-5-1.With a height of 51 mm, a width of 58 mm, and a depth of 30 mm, the ZCT body has a net weight of 0.13 kg. It is equipped with screw-clamp terminals that accommodate wire sizes from 0.5 mm² to 2.5 mm², facilitating easy electrical connections. The device also features a rated insulation voltage of up to 500 V and meets stringent safety standards, including positive opening contacts.Designed for operation in ambient temperatures ranging from -25 °C to 70 °C, the ZCT is suitable for various industrial applications. Its environmental credentials include compliance with the EU RoHS directive and a sustainable product profile.

The XS1 M18 inductive proximity sensor is engineered for the non-contact detection of metallic objects, facilitating high operational rates and rapid response times. Its cylindrical design, with a diameter of 18mm and a length of 72mm, allows for flush mounting, while the nickel-plated brass housing ensures durability in industrial environments.Operating within a multi-voltage range of 24V to 240V AC or DC, this sensor employs a two-wire configuration and features a normally open (NO) output. The sensor's nominal sensing distance is 5mm, and it is equipped with short-circuit protection, making it suitable for various applications. The sensor operates effectively in temperature ranges from -25°C to 70°C and can withstand shocks up to 50 gn.With a rated supply voltage of 24...210 V DC and 24...240 V AC at 50/60 Hz, the XS1 sensor complies with IP67 standards for environmental protection, ensuring reliable performance even in challenging conditions. The device includes a male 1/2-20 UNF connector for ease of installation and connectivity. This product aligns with sustainability initiatives, being free from mercury and compliant with environmental regulations.

This cord set is integral to the Modicon X80 range, providing a streamlined solution for input/output connections in automation systems associated with Modicon M340 and Modicon M580. The product features a 40-pin connector, which can be linked to sensors, pre-actuators, or terminals via a cable that ensures reliable direct wire-to-wire connections for the module's I/O.Weighing 2.77 kg and measuring 10 meters in length, this preformed cord set is designed to support a single cable with 20 wires, complying with DIN 47100 standards. Its specifications, including an AWG gauge of 22 and a wire section of 0.324 mm², ensure compatibility and performance in various industrial applications. The Modicon X80 architecture reduces spare parts inventory and training costs by utilizing a common platform for multiple Programmable Automation Controllers (PAC).This product is particularly suitable for industries such as Smart Infrastructure, Water and Waste Water management, Consumer Packaged Goods, Mining Minerals Metals, Data Centers, and Power Generation. Moreover, it meets stringent environmental standards, including compliance with China’s RoHS regulation and being mercury-free, while also addressing California Proposition 65 warnings regarding potential chemical exposure.

This 3-phase stepper motor, designed for Lexium SD3 drives, features a maximum mechanical speed of 3000 RPM and a nominal torque of 12 Nm. The motor operates without a holding brake and includes a parallel key shaft end with a diameter of 19mm. An angled connector facilitates electrical wiring. With a step capacity of 200 steps per 1.8 degrees, this motor supports various configurations for precise control, allowing for up to 10000 full steps per revolution. The rated current is 4.1 A, and it operates within supply voltage limits of 230 VAC and 325 VDC. The degree of protection is IP56, ensuring usability in demanding environments. Weighing 8.2 kg, this motor features a flange size of 110 mm, secured by four 9 mm mounting holes, arranged in a circle with a diameter of 125.86 mm. It is suitable for various mounting positions as specified by IEC 60034-7, including horizontal and vertical shaft orientations. The product complies with multiple standards, including CE, CUL, and UL certifications, and meets the requirements set forth in EN/IEC 50178 and EN/IEC 61800 series.

The XCMN model represents a compact limit switch designed for repetitive machinery applications. With a fixed plastic body and a round thermoplastic rod lever measuring 6 mm in diameter, it is suitable for various operational environments.Its contact configuration consists of 1 NC and 1 NO, utilizing snap action for reliable performance. The switch comes with a pre-cabled connection, featuring a cable length of 1 meter for straightforward installation.Operating under a range of -25 to 70 °C, this miniature limit switch complies with multiple standards, including UL 508 and EN/IEC 60947-5-1, ensuring broad application compatibility. The device is built to endure mechanical stresses, offering a durability rating of up to 5 million cycles.The XCMN limit switch includes a lateral approach actuation mechanism and is designed for ease of mounting by securing through the body. Its compact dimensions of 30 mm in width, 16 mm in depth, and a height of 232 mm make it suitable for confined spaces.

The XS1 M18 inductive proximity sensor is designed for general-purpose applications, featuring a cylindrical body with a length of 50mm and a flush mountable design. It operates within a supply voltage range of 12 to 24V DC and is equipped with a nickel-plated brass housing that provides enhanced durability and magnetic shielding, ensuring accuracy in environments with potential interference.This sensor incorporates a high-performance PPS sensing face and offers an IP65, IP67, and IP69K protection rating, making it suitable for use in harsh conditions. Its operating temperature range spans from -25°C to +70°C, allowing it to function reliably in extreme environments. The sensor's M12 connector ensures compatibility with existing sensor cabling infrastructure.With a nominal sensing distance of 8mm and a maximum switching frequency of 1000 Hz, this device can efficiently handle applications in mobile equipment. The integrated LED indicators facilitate easy monitoring of the sensor's operational status, aiding in setup and troubleshooting. The sensor is certified for safety and reliability, meeting CSA, UL, and E2 standards.

This accessory is tailored for use with V3 and V4 switch bodies, specifically designed for 60 x 60 mm front plates. Each set comprises five units, facilitating convenient installation and replacement. Weighing only 0.033 kg per unit, the seal contributes to the overall compactness of the setup. As part of the Mini-VARIO || VARIO range, this seal is classified under protection accessories, ensuring enhanced operational integrity for switch disconnectors. The product adheres to RoHS directives and is free from substances of very high concern, thus aligning with environmental compliance standards. The environmental disclosure is documented under ENVPEP2211006.

This limit switch belongs to the XC Standard series, designed for diverse industrial applications including packaging, materials handling, and food and beverage processing. It incorporates a metal round rod lever with a 3 mm diameter, facilitating a rotary movement for actuation via a 30° cam. The device operates with a rated current of 3A at 240VAC (A300) and 0.27A at 250VDC (Q300), while providing a conventional enclosed thermal current of 10A.With a mechanical durability of 30 million cycles and electrical durability of 5 million cycles, this switch is equipped with screw clamp terminals for reliable electrical connection. Its IP66 and NEMA 1/2/4/12 ratings ensure effective protection against environmental factors. The limit switch measures 1.57 inches in width, 1.73 inches in depth, and 3.03 inches in height, weighing 1.07 lbs. It is compliant with multiple standards, including UL 508 and CSA C22.2 No.14, and is RoHS compliant.Designed for contact sensing of rigid objects, the switch offers a positive opening snap action mechanism enhancing machine safety and simplicity. The entry for cable connection is tapped for a 1/2 inch NPT cable gland, making it suitable for various installation scenarios. The device is certified under multiple standards, ensuring its reliability and adherence to industry requirements.

The XCSLE safety switch is an integral component of the XCS series, designed to ensure safe operation in a variety of industrial settings. It is equipped with 2 normally closed (NC) and 1 normally open (NO) contacts, featuring a slow break and break before make operation, which enhances safety by preventing unintended machine startup.This device operates at a rated supply voltage of 24 V and is compatible with electrical connections via spring terminals, supporting cables up to 1.5 mm² for flexible or solid configurations. It is capable of withstanding a maximum load current of 15 A and has a conventional enclosed thermal current rating of 4 A. The switch's robust design, made from PA (polyamide), ensures durability, while its IP66/IP67 rating signifies excellent resistance to dust and water ingress.The dimensions of the switch are 44 mm in width, 51 mm in depth, and 205 mm in height, with a total weight of 0.53 kg. Its key-operated turret head design adds an additional layer of security, making it suitable for applications across sectors such as packaging, robotics, and automotive machinery. The safety switch meets various standards including EN 1088/ISO 14119 and UL 508, ensuring compliance with stringent safety regulations. Moreover, it offers local signaling with an orange LED for actuator withdrawal and a green LED for actuator insertion and locking.