Ricambi Schneider Automation – Soluzioni affidabili per l’automazione industriale

This Multi9 C60BPR is a low voltage miniature circuit breaker (MCB). It is a 2P circuit breaker with 2 protected poles, 10A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard and 10kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 4 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 36mm x (H) 127mm x (D) 72mm. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.

The SE Relays 861H series, patented solid-state, UL certified for Class I Division 2 Hazardous Locations per ISA 12.12, relay offers an energy-efficient SCR AC zero cross current switching device with input voltage range as 90VAC to 280VAC. SPST-NO contacts with rated current 10A and output voltage 24VAC to 280VAC Solid-state circuitry involves no moving parts and is alternative to standard electromechanical relays. Advantages include longer life cycles, less energy consumption, and reduced maintenance costs. Optically coupled circuit provides isolation between input and output circuits. Internal snubber helps protect the relay’s internal circuit from high voltage transients. Internal heat sink provides factory tested thermal management. Finger protected terminals help prevent an operator from touching live circuits. Mounts directly onto a DIN rail or panel, and provides flexibility to accommodate last-minute design changes.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 110A resistive load rating. Contactor is supplied with a 240 VAC 50 Hz coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.78 inches wide and 4.92 inches deep. It weighs 3.88 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys F AC coil 110V 40-400Hz (voltage code F7), low inrush consumption, short operating times, for TeSys F 3-pole and 4-pole contactors LC1 F500, FG500. To be associated with a rectifier DR5TF4U (to be ordered separately). It operates in the voltage limits 0.85-1.1 Uc and environments until 70°C. It provides to the contactor high operating rates until 3600 cycles/hour. Green Premium compliant (RoHS/REACh).

This Harmony ZB contact block is specifically designed for low power switching contacts and operates effectively in dusty environments. It features fast-on terminals for easy installation and replacement. The contact block is compatible with Harmony XB4 and XB5 control and signaling units, allowing for seamless integration of specific control and signaling products.The contact block is designed to be easily installed and replaced on XB4 and XB5 control and signaling units. It connects to control circuits with fast-on connections, ensuring a secure and reliable connection. The IP20 protection index provides protection against dust and other environmental factors, making it suitable for use in dusty environments.With a high endurance of 1 million cycles under 6A load, this contact block offers less maintenance and damage to your installation. It also has a clear color scheme for NO (Normally Open) and NC (Normally Closed) contact block types, making it easy to identify the correct type.The wide range of operating temperatures from -40°C to 70°C allows for versatile usage of this product. Its compatibility with Harmony XB4 and XB5 control units makes it a valuable addition to any installation requiring low power switching contacts in dusty environments.

8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This three pole definite purpose contactor has a full load rating of 50 ampere and a resistive rating of 65 amperes. It also has a 3 HP at 115 VAC single phase, 10 HP at 230 VAC single phase and 15 HP at 230 VAC three phase, 30 HP at 460 VAC three phase and 30 HP at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 110/120 VAC 50/60 Hz coil. The contactor has straight through wiring. Contactor is 4.06 inches by 2.56 inches and 3.67 tall. These contactors are UL component recognized and CSA certified.

The TeSys F reversing contactor is a robust solution, specifically designed for motor applications. With a capacity of 115A/690V AC-3, it can handle power up to 55kW@400V. This model features 3 poles (3NO) and comes without a coil, providing bolt terminals for bars or cables with lugs. It is equipped with pre-wired reversing power connections, mechanical interlock, and does not have electrical interlocking. For electrical interlocking, front mounting auxiliary contact blocks LADN*1 can be added separately. This product is multi-standard certified (IEC, UL, CSA, CCC, EAC, Marine), ensuring compliance with various industry standards and regulations. It also adheres to Green Premium standards, complying with RoHS/REACh directives.

The Schneider EasyLogic PM2230 is a highly accurate power and energy meter designed for panel or flush mounting. It boasts a 96mm by 96mm bezel and a backlit LCD display with a resolution of 128 by 128 pixels. This meter offers high precision in measuring active energy, complying with Class 0.5S of the IEC 62053-22 standard, and a sampling rate of 64 samples per cycle. It measures active, apparent, and reactive power, along with voltages, current, frequency, and power factor. Additionally, it provides total harmonic distortion and individual harmonics up to the 31st order.Key Features:Class 0.5S accuracy for active energyMeasures up to the 31st harmonicRS485 communication port with Modbus RTU protocolUniversal control power voltage range (80-300 V AC/DC)Supports multiple wiring schemesApplications:Power monitoringSub billingPower quality analysis

This product is a specialized cooling fan designed to work with Schneider Electric's Altivar Process 600 and 900 variable speed drives. The fan is suitable for applications ranging from 110kW to 315kW and operates at voltages between 380V and 440V. It is designed to enhance the lifespan of the drive by efficiently dissipating heat.The fan features a fixed body made of plastic, with dimensions of 11cm (width) x 10cm (length) x 10cm (height), and weighs approximately 1.2kg. It is compatible with Altivar Process drives from ATV630C11N4F to C31N4F, ATV650C11N4F to C31N4F, ATV930C11N4F to C31N4F, and ATV950C11N4F to C31N4F. The kit includes one door fan, one bracket, and an instruction sheet.This cooling fan is ideal for use in variable speed drives for pumps, fans or compressors up to 2600 kW, as well as conveyors, cranes, or mills up to 2600 kW. Its compact design and high efficiency make it a valuable addition to any industrial automation system.

LC2D096BD is a Schneider Electric 3-pole TeSys D reversing contactor for motor applications up to 4kW@400V. It provides 24V DC coils, 2NO+2NC built-in auxiliary contacts (NC mirror contacts), power and control connections by ring-lugs screw terminals. Equipped with pre-wired reversing power connections, and mechanical interlock. Compact (90mm width), DIN-rail mounting, it procures high reliability and durability. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). With pre-wired reversing power connections, mechanical interlock (without electrical interlocking). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

TeSys H ultra compact direct safety starter, 3 poles, 6.5A/500V AC-53, for control and protection of 3-phase motors up to 3kW@400V (3HP@480V). The hybrid technology used for power contacts procures ultra compactness (22.5mm width) as well as an extended electrical durability up to 30 million cycles AC-53. It provides control for one direction of rotation, an adjustable motor current 1.5-6.5A, class 10A thermal overload protection with auto/manual/remote reset, phase loss and phase unbalanced protection, stall and jam motor protection. To be supplied with 110-230V AC, it provides logic inputs for ON/OFF motor running and remote reset after thermal tripping, 1C/O contact relay for fault indication, LED status on front face for indication of tripping and motor running. With an integrated Safe Torq Off (STO) function with SIL3 level according IEC61508-1 and PLe level according ISO13849-1, it can be integrated to safety chain applications. DIN rail mounting, screw terminals for control and power, it can be used for ambient temperatures from -25 to 70°C, without derating until 30°C. Multi standards certified (IEC, UL, CCC), Green Premium compliant (RoHS/REACh).

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 20A resistive load rating. Contactor is supplied with a 125 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The XC Special Range Limit Switch is designed to convert mechanical motion into an electrical control signal. It features four pole, snap action contacts with positive opening operation. This safety switch has a rated operational current of 3A at 240V and 0.27A at 250V. The limit switch is equipped with screw clamp terminals for electrical connection and is IP54 rated, ensuring long mechanical and electrical life. It can handle up to 10 million operating cycles mechanically and 5 million electrically. The rotary head limit switch has a fixed type body made of zinc alloy. This product is suitable for applications in hoisting handling, mining minerals metals, and other strong environmental constraints such as foundry, welding, and automotive industries. It complies with various safety standards including CSA and CCC certifications, NF C 79-130, IEC 60947-5-1, IEC 60204-1, EN 60947-5-1, EN 60204-1, and CSA C22.2 No 14. The limit switch is available in a dimension of 85mm (width) x 75mm (depth) x 95mm (height) and weighs 1.135kg. It is designed for severe environments and heavy duty service, offering complete unit with 3 cable entries and positive opening contacts, one per position.

The Schneider Electric TeSys F Contactors - AC-3 - 500A/1000V is a high-performance, drawer-mounted contactor designed for motor applications up to 250kW at 400V. It features a low sealed consumption coil of 120/127V 40-400Hz AC, and bolt terminals for bars or cables with lugs. This contactor is designed to operate in high rates until 2400 cycles per hour and environments up to 55°C. It offers a high reliability and durability, making it an ideal choice for demanding applications. Installation and maintenance are made easy with the drawer-mounted coil and a wide range of add-on blocks and accessories (to be ordered separately). The TeSys F Contactors - AC-3 - 500A/1000V is multi-standard certified (IEC, UL, CSA, CCC, EAC, Marine), and Green Premium compliant (RoHS/REACh).

The TeSys F AC Coil, model LX1FH, is a high-performance component designed for use with TeSys F contactors. It operates at 48V and supports frequencies from 40 to 400 Hz (voltage code E7). This coil is known for its low sealed consumption and operates within voltage limits of 0.85-1.1 Uc, making it suitable for environments up to 55°C. The TeSys F AC Coil provides high operating rates to the contactor, with a maximum of 2400 cycles/hour. It is RoHS/REACh compliant and adheres to Green Premium standards, ensuring it meets all necessary environmental regulations.

The PowerPacT B-Frame Circuit Breaker delivers robust thermal-mechanical protection in a compact design, offering versatile accessories and connection options. This circuit breaker is equipped with dual-break rotating contacts that minimize peak current during short circuit faults. Featuring an integral push-to-trip button on the cover for manual tripping, this unit mount construction provides traditional back pan mounting with screws or DIN rail mounting for installation flexibility. The EverLink lugs, a patented design that reduces cable loosening over time, are available on both termination ends. With a breaking capacity of 18kA at 600Y/347VAC and a continuous current rating of 80%, this PowerPacT B Circuit Breaker complies with UL, CSA, NOM, and IEC standards and is CE marked. EverLink lugs also come with unique integrated control wire terminals for enhanced functionality.

Introducing the Compact NSX100H, a state-of-the-art 3P 3d fixed circuit breaker engineered to maximize space utilization and breaking capability. This innovative product is an ideal choice for a wide range of applications, offering a robust solution that combines performance with compact design.With a breaking capacity of 70kA rms at 415VAC 50/60Hz, the NSX100H delivers exceptional performance in various operational conditions. Its operational voltage is 690VAC 50/60Hz, ensuring reliable and efficient operation.Equipped with an advanced MicroLogic 2.2 trip unit, this circuit breaker offers a 40A rating, providing adjustable long time and short time protections along with a fixed instantaneous protection. The compact dimensions of the 3 poles version (105mm x 161mm x 86mm) make it an excellent choice for space-constrained environments.The NSX100H is compliant with international standards, including IEC 60947, CCC, EAC, and marine specifications. It is part of the Schneider Electric EcoStruxure Power architecture, ensuring seamless integration into your existing infrastructure.

This Micrologic 2.2 is a 3 poles 3d electronic trip unit used on Compact NSX 100/160/250 circuit breakers. This 40A rating electronic trip unit is an optimum choice for all standard and specific applications. It embeds an adjustable long time protection against overloads. It provides also an adjustable short-time protection and a fixed instantaneous protection against short-circuits. Micrologic 2.2 indicates overloads with Alarm LEDs. The green Ready LED flashes if the circuit breaker is ready to trip. This product is part of our EcoStruxure Power architecture if associated with PowerTag NSX and Compact NSX basic frame.

This Micrologic 2.2 is a 4 poles 4d electronic trip unit used on Compact NSX 100/160/250 circuit breakers. This 40A rating electronic trip unit is an optimum choice for all standard and specific applications. It embeds an adjustable long time protection against overloads. It provides also an adjustable short-time protection and a fixed instantaneous protection against short-circuits. Micrologic 2.2 indicates overloads with Alarm LEDs. The green Ready LED flashes if the circuit breaker is ready to trip. This product is part of our EcoStruxure Power architecture if associated with PowerTag NSX and Compact NSX basic frame.

The Schneider Electric Compact NSX250N Basic Frame is a space-efficient solution designed for various applications. This basic frame comes without a trip unit, making it compatible with any type of trip unit that needs to be ordered separately. The breaking capacity is 50kA at 415VAC 50/60Hz. It can operate at 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there's an earth-leakage protection).This frame is equipped with a variety of optional functions and accessories, ensuring it meets international standards such as IEC 60947, CCC, EAC, and marine specifications. It is part of Schneider Electric's EcoStruxure Power architecture.