Alimentazione Siemens

The SINAMICS G120 Control Unit CU240E-2 PN E-TYPE Safety Integrated STO PROFINET 6DI, 3DO, 2AI, 2AO, MAX 1F-DI PTC/KTY Interface USB- and SD/MMC-Interface Protection IP20 Ambient Temp 0 to +50 Deg C…

SINAMICS v20 3AC380-480v -15/+10% 47-63HZ rated power 11KW with 150% overload for 60sec unfiltered i/o-interface 4di, 2do,2ai,1ao fieldbus uss/ modbus rtu with inbuilt bop protection IP20/ ul open…

SINAMICS G120 MODULO DI POTENZA PM240-2 CON FILTRO INCORPORATO CL. A E CHOPPER DI FRENATA INTEGRATO 3AC380-480V +10/-20% 47-63HZ USCITA ALTO SOVRACCARICO: 75KW PER 200% 3S,150% 57S,100% 240S TEMP…

The SITOP Inrush Current Limiter is a primary control gear designed for use with SITOP Power Supplies. This module effectively limits inrush current during startup and maintains stable operation…

TRANSFORMER SITAS; PHASES:1; PN/PN(S6)(KVA):1.6 /7.3; UPRI(V):500+/-5%; USEC(V):110; ISEC(A):14.5; F(HZ):50...60; VECTOR GR./SHIELD WNG.:II0 /0; TA/ISOKL:40 /B; IP00; TYPE OF TERMINALS:SCREW/TAB…

The SINAMICS V20 AC Drive is designed to operate within the voltage range of 200-240V, delivering a rated power of 0.55kW with an impressive overload capacity of 150% for up to 60 seconds. This…

SINAMICS v20 3AC380-480v -15/+10% 47-63Hz rated power 5.5KW with 150% overload for 60 sec unfiltered i/o-interface 4di, 2do,2ai,1ao fieldbus uss/ modbus rtu with inbuilt bop protection IP20/ ul open…

SINAMICS G120X Rated power: 1.1 kW At 110% 60s, 100% 240 s Unfiltered 380-480 V 3 AC +10/-20% 47-63 Hz Ambient temperature -20 to +45 °C Size: FSA Degree of protection IP20 / UL open type Paint…

SINAMICS G120P POWER MODULE PM230 WITH BUILT IN CL. A FILTER PROTECTION IP55 / UL TYPE12 3AC380-480V +10/-10% 47-63HZ OUTPUT LOW OVERLOAD: 45KW FOR 110% 60S,100% 240S AMBIENT TEMP 0 TO +40 DEG C(LO)…

The SIRIUS soft starter is a versatile product that offers a variety of values at different voltage and temperature conditions. It provides standard 57 A, 30 kW for applications operating at 400 V…

Modulo di potenza SINAMICS g120 PM240-2 non filtrato con chopper di frenatura integrato 3AC380-480V +10/-10% 47-63HZ uscita sovraccarico alto 2,2KW per 200% 3s, 150% 57s, 100% 240s temperatura…

The SITAS Transformer , specifically designed for single-phase operations, is a versatile solution catering to both control circuit and isolation transformer needs. This transformer boasts a power…

SINAMICS G120P MODULO DI POTENZA PM230 CON FILTRO CL. A INCORPORATO PROTEZIONE IP55 / UL TYPE12 3AC380-480V +10/-10% 47-63HZ USCITA BASSO SOVRACCARICO: 75KW PER 110% 60S,100% 240S TEMP. AMBIENTE 0 A…

SINAMICS g120 modulo di potenza pm250 con filtro cl. A integrato possibilità di rigenerazione 3AC380-480V +10/-10% 47-63HZ uscita ad alto sovraccarico 5,5KW per 200% 3s, 150% 57s, 100% 240s…

The SINAMICS G120 PM250 is a high-power, regenerative power module designed for industrial applications. It operates at 3AC380-480V with a +10/-10% tolerance and a frequency range of 47-63Hz. This…

The SIRIUS soft starter is a versatile device designed to handle a wide range of power requirements. It offers values at 575 V and 50 °C, including 315 A for 300 hp and 546 A for 600 hp. This starter…

The SITAS Phase Transformer is a high-quality, single-phase transformer that offers a range of power ratings from 2.5 to 13.3 KVA. This transformer is designed to meet the needs of control circuit…

SINAMICS G120X Rated power: 0.75 kW At 110% 60s, 100% 240 s Radio interference suppression filter for category C2 380-480 V 3 AC +10/-20% 47-63 Hz Ambient temperature -20 to +45 °C Size: FSA Degree…

The SINAMICS G120C is a robust and versatile motor control solution, boasting a rated power of 4.0KW with an impressive 150% overload capacity for up to 3 seconds. Designed for three-phase AC…

The Siemens SITAS 4AM5742-5AT10-0FC0 is a single-phase transformer designed to provide stable and isolated power for control circuits. This transformer is built to withstand demanding industrial…