Alimentazione Siemens

SINAMICS G120 POWER MODULE PM240-2 WITHOUT FILTER WITH BUILT IN BRAKING CHOPPER 3AC380-480V +10/-20% 47-63HZ OUTPUT HIGH OVERLOAD: 110KW FOR 200% 3S.150% 57S.100% 240S AMBIENT TEMP -20 TO +50 DEG C…

SINAMICS g120d power module pm250d with built in cl. a filter possibility of regeneration 3AC380-480v +10/-10% 47-63HZ output high overload 4,0KW for 200% 3s,150% 60s,100% 300s ambient temp -10 to…

SINAMICS G120 MODULO DI POTENZA PM240-2 CON FILTRO INC A INCORPORATO CON CHOPPER DI FRENATA INC 3AC380-480V +10/-20% 47-63HZ USCITA ALTO SOVRACCARICO: 55KW PER 200% 3S.150% 57S.100% 240S TEMP…

The SINAMICS PM240-2 power module is designed without a filter, incorporating a built-in braking chopper for efficient operation. This module operates at 1/3AC 200-240V with a +10/-10% voltage…

TRANSFORMER SITAS; PHASES:1; PN/PN(S6)(KVA):0,063 /0,19; UPRI(V):230+/-5%; USEC(V):24; ISEC(A):2,63; F(HZ):50...60; VECTOR GR./SHIELD WNG.:II0 /0; TA/ISOKL:40 /B; IP00; TYPE OF TERMINALS:SCREW/TAB…

The Siemens Safety Isolating Transformer is a high-quality electrical component designed for single phase applications. It has a power rating of 0.315/1.12 kVA and operates at a frequency of 50-60 Hz…

MODULO DI POTENZA SINAMICS G120P PM230 CON FILTRO INTEGRATO CL. B PROTEZIONE IP55 / UL TYPE 12 3AC 380-480 V +10/-10% 47-63 HZ USCITA BASSO SOVRACCARICO: 1,1 KW PER 150% 3S. 110% 57S. 100% 240S TEMP…

L'unità SITOP UPS500S Basic è un gruppo di continuità esente da manutenzione, progettato per garantire una continuità di alimentazione affidabile per applicazioni critiche. Con un ingresso di 5 kW e…

The Siemens SITOP PS is a robust, high-performance power supply designed for stabilizing loads. It offers an impressive maximum output of 40A with a stable voltage of 24V DC. With a wide input…

SINAMICS g120 power module pm240-2 without filter with built in braking chopper 1/3AC200-240v +10/-10% 47-63HZ output high overload 0,75KW for 200% 3s,150% 57s,100% 240s ambient temp -10 to +50 deg c…

The SITAS control circuit transformer is a high-quality electrical component designed to provide reliable power distribution in various industrial and commercial settings. This transformer is…

Modulo di potenza SINAMICS g120 PM250 con filtro integrato classe A, possibilità di rigenerazione 3AC380-480V +10/-10% 47-63Hz, uscita sovraccarico elevato 22 kW per 200% 3s, 150% 57s, 100% 240s…

This Power Supply is designed for industrial applications, offering a three-phase configuration with a power rating of 0.36 kW. Input Voltage: The unit can operate at 400+/-20 V or 230+/-10 V, making…

SINAMICS v20 3AC380-480v -15/+10% 47-63HZ rated power 0.37KW with 150% overload for 60sec integrated filter c3 i/o-interface 4di, 2do,2ai,1ao fieldbus uss/ modbus rtu with inbuilt bop protection…

This transformer is a single phase model, designed for primary voltages ranging from 400 to 230 volts with a tolerance of +/- 15 volts. It has a power rating of 0.5 kVA and is UL/CSA recognized. It…

SINAMICS G120C RATED POWER 5,5KW WITH 150% OVERLOAD FOR 3 SEC 3AC380-480V +10/-20% 47-63HZ INTEGRATED FILTER CLASS A I/O-INTERFACE: 6DI, 2DO,1AI,1AO SAFE TORQUE OFF INTEGRATED FIELDBUS: USS/ MODBUS…

SINAMICS v20 3AC380-480v -15/+10% 47-63HZ rated power 2.2KW with 150% overload for 60sec integrated filter c3 i/o-interface 4di, 2do,2ai,1ao fieldbus uss/ modbus rtu with inbuilt bop protection IP20/…

The SINAMICS G120C, rated at 2.2KW with a 150% overload capability for 3 seconds, is designed to operate within the voltage range of 3AC380-480V with a tolerance of +10/-20%. This motor control…

The SINAMICS G120C DP is a high-performance drive system designed to deliver a rated power of 0.55KW with an overload capacity of 150% for up to 3 seconds. This drive operates at a voltage range of…

The SIRIUS Soft Starter , designed to handle up to 180A and 125HP, operates at a voltage of 690V. This starter is equipped with screw terminals for straightforward installation. It is rated for a…