EHDT554MU210

Specifications

NETXASC

Digitally addressable ballasts that provide a low-cost, flexible solution for any space in any application. Industry leading, continuous, flicker-free dimming from 100 to 1 % to meet the needs of the most demanding applications. Individual control with the EcoSystem Digital Link eliminates the need to rewire, reduces design time, and provides a scalable solution from a small area to an entire building. Compatible with Energi Savr Node with EcoSystem and GRAFIK Eye QS control units, PowPak dimming module with EcoSystem units, and Quantum software, allowing for integration into an existing or planned EcoSystem lighting control solution. Programmed rapid start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling. 100 % performance tested and burned in at factory. Lamps turn on to any dimmed level without going to full brightness. Low harmonic distortion throughout the entire dimming range maintains power quality. Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 and 42 kHz. Maintains consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity. Ultra-quiet operation. Protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground. End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life. Non-volatile memory restores all ballast settings after power failure. 100 % compatible with all EcoSystem digital controls. Custom ballast factors available for UL or CSA listed products. Design tool and specifications can be found at www.lutron.com/ballasttool.

NETXCAT

EcoSystem H-series M-case ballast, continuous, flicker-free dimming from 100 percent to 1 percent, 1 lamp, 54W, ballast factor of 1.00

NETXPOL

Lutron Online Policy - PUBLIC

NETXMB1

Continuous, flicker-free dimming from 100% to 1% or less for T8, and 1% for T5 and T5HO lamps.

NETXMB2

Compatible with Energi Savr Node with EcoSystem unit, GRAFIK Eye QS control unit, PowPak dimming module with EcoSystem unit, and Quantum software, allowing for integration into an existing or planned EcoSystem lighting control solution.

NETXMB3

Programmed rapid start design preheats lamp cathodes before applying full arc voltage to ensure full-rated lamp life while dimming and cycling.

NETXMB4

Lamps turn on to any dimmed level without going to full brightness.

NETXMB5

Low harmonic distortion throughout the entire dimming range maintains power quality.

NETXMB6

Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 kHz and 42 kHz.

NETXMB7

Ballasts maintain consistent light output for different lamp lengths, ensuring fixture-to-fixture uniformity.

NETXMB8

Ultra-quiet operation.

NETXMB9

Ballast protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground.

NETXMB10

End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life.

Class Code

ED-LSR

Amperage Rating

1.02@120 V/0.50@240V/0.43@277V

Application

Lighting Control

Ballast Factor

1

Color

White

Frequency Rating

50/60 Hz

Height

1 in | 25 mm

Lamp Type

T5HO Linear fluorescent

Length

14.13 in | 359 mm

Minimum Starting Temperature

50 F | 10 C

Mounting

Fixture

Number Of Lamps

2

Power Factor

Greater than 0.95

Start Type

Programmed rapid

Thermal Protection

Class P

Total Harmonic Distortion

Less than 10%

Type

Ballast

Voltage Rating

120/240/277 V

Wattage

54 W

Width

1.18 in | 30 mm

Documents