LUT-LBX-WH

Specifications

NETXASC

Provides capability for certain Lutron dimmers to control low-voltage loads from 0 W to the dimmer's minimum rating. Presents a simulated load to the dimmer to meet the minimum load requirements even when the actual load is smaller. Works with forward phase or leading edge dimmers, and reverse phase or trailing edge dimmers.

NETXCAT

GRAFIK Eye Synthetic minimum load interface, 120 V

NETXPOL

Lutron Online Policy - PROHIBITED

NETXMB1

Provides capability for certain Lutron dimmers to control low-wattage loads from 0 watts up to the dimmer's minimum rating

NETXMB2

Presents a simulated load to the dimmer to meet the minimum load requirements even when the actual load is smaller.

NETXMB3

Works with forward phase or leading edge dimmers and reverse phase or trailing edge dimmers.

NETXMB4

Models available for 120V and 220-240V input power.

NETXMB5

This load-side equipment installs on the zone wiring in parallel with the lighting load.

NETXMB6

Dissipates a maximum of 10 watts when the controlling dimmer is near high-end.

Class Code

ED-LSR

Enclosure

Plastic

Environmental Conditions

0 to 40 degrees Celsius. 0 to 90% humidity, non-condensing

Height

4.56 in | 116 mm

Input Voltage

120 VAC

Insulation

Plastic

Length

4.56 in | 116 mm

Mounting

Surface or recess

Output Voltage

120 VAC

Type

Synthetic minimum load interface

Width

2.55 in | 65 mm

Documents