25-110-3000-psi/kPa

Specifications

Accuracy

2.5 %

Type

Dry Pressure Gauge

Connection Location

Back

Dial/Display Size

White background with black primary scale & red secondary scale. UV resistant.

Lens/Display Material

Acrylic

Material

Acrylonitrile Butadiene Styrene (ABS)

Series

100

Ambient Temperature Range

-40 to 60 ºC, -40 to 140 ºF

Assembly Options

NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.

Bezel Material

Built-in bezel, molded as an integral part of the case for ease of panel mounting.

Caution

Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered when selecting gauges and accessories. Improper selections and use of gauges could possibly cause gauge failure and lead to possible property damage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of this standard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York, NY 10017. In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.

Connection Material

Brass

Connection Size

1/4 in

Diaphragm Seals

NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.

Distribution Manifolds

NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.

Gauge Size

2-1/2 in

Installed Options and Accessories

Available Red Set Pointer (SP) 10-32-UNF-2B (10-32) Orifice - Brass Press Fit Sintered, 20 Micron (CPO) Orifice - Brass Press Fit 0.1 mm (BP1) Orifice - Brass Press Fit 0.3 mm (BP3) - Standard Orifice - Brass Press Fit 0.8 mm (BP8) Laser Marking (LM) Stainless Steel Tagging (ST) Certificates Certified Calibration (CC) Cleaning for Oxygen Service (O 2 ), Up to 1,000 psi Cleaning for Oxygen Service (O 2 ), 1,500 psi and up Consult Factory Black Steel Case (BSC) Chrome Case (CRC) Stainless Steel Case (SSC) Silicone Dampened Movement (SDM) Glass Lens (GL) (A Steel, Stainless or Chrome Case & Cover Ring must be additionally ordered when Lenses other than acrylic are utilized on all 100 Series Models) Chrome Front Flange (SCFF) Steel Case Black Front Flange (SBFF) Steel Case Black Cover Ring (BCR) Stainless Steel Cover Ring (SSCR) Chrome Cover Ring (CCR)

Measuring Element

Copper Alloy Bourdon Tube

Media Temperature Range

-20 to 60 ºC, -4 to 140 ºF

Movement

Brass & nylon, or all-brass with highly polished bearing surfaces

Pointer

Molded Plastic

Pressure Range

0 to 3,000 psi

Scale Option

psi/kPa Dual Scale

Steam Syphons

Protect the instrument from the damaging effects of high temperature steam Recommended for use in all steam applications Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF

Stock

Yes

Swivel Adapters

Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF Used with gauges and gauge valves to adjust the line of sight Rotates 360º to allow the connected instrument to be positioned in the desired direction The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut All 316 Stainless Steel construction Standard with 1/2" NPT male process - 1/2" NPT female instrument connections Also available with 1/4" NPT connections, same specifications apply Weight approximately 0.8 lb.

Uninstalled Options and Accessories

Certificate of Cleaning (COCL) Certificate of Conformance (COC)

Warranty

1 yr