45-740-1000-psi/kg/cm2

Specifications

Accuracy

0.5 %

Type

Pressure Gauge

Connection Location

Bottom

Dial/Display Size

Aluminum, white background with black scale. UV resistant.

Lens/Display Material

Acrylic

Material

Turret Style Black Polypropylene Case Solid Front, Safety Case with Blow-Out Back

Series

700

Ambient Temperature Range

-40 to 65 ºC, -40 to 150 ºF

Assembly Options

NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.

Bayonet Ring Material

Threaded Black PBT

Case Type

Stainless Steel (SS), Dry, Bottom Connection

Connection Material

316 Stainless Steel

Diaphragm Seals

NOSHOK offers a wide variety of standard & elevated pressure, and reduced pressure replaceable and non-replaceable diaphragm seals, designed to isolate and/or protect the pressure measuring instrument from corrosive, viscous, contaminated or very high temperature process media.

Distribution Manifolds

NOSHOK's Distribution Manifolds connect multiple instruments to one diaphragm seal, eliminating multiple connections that lead to possible leak paths.

Gauge Size

4.5 in

Installed Options and Accessories

Available 10-32-UNF-2B (10-32) Orifice - 316SS Threaded 0.8 mm (ST8) - Standard Orifice - 316SS Threaded 0.5 mm (ST5) Laser Marking (LM) Stainless Steel Tagging (ST) Certificates Certified Calibration (CC), Vacuum through 15,000 psi Cleaning for Oxygen Service (O 2 ), Up to 1,000 psi Cleaning for Oxygen Service (O 2 ), 1,500 psi and up

Measuring Element

316 Stainless Steel Coiled Safety Bourdon Tube

Media Temperature Range

-40 to 100 ºC, -40 to 212 ºF

Metric Dials and Customized Special Dials

Dual scale metric dials in psi/bar, psi/kPa and psi/kg/cm 2 Other scales are available for specific sizes and ranges, such as single scale bar and kPa, refrigerant scales and altitude scales Customized special dials such as non-standard metric scale, tons of ram, lbs. of force, etc. are available in small quantities (as few as one piece) on some NOSHOK gauges Please consult the factory for availability.

Movement

Stainless steel with highly polished bearing surfaces. An internal zero stop is standard.

Pointer

Balanced micro-adjustable aluminum, black finish

Pressure Range

0 to 1,000 psi

Reid Vapor Test Gauges

Configuration includes a handle, special dial and special pressure port Configuration includes a handle, special dial and special pressure port

Scale Option

psi/kg² Dual Scale

Short Term/Intermittent Temperature

260 ºC, 500 ºF

Steam Syphons

Protect the instrument from the damaging effects of high temperature steam Recommended for use in all steam applications Available in 1/4" and 1/2" NPT sizes in welded steel, welded 316 Stainless Steel or seamless 316 Stainless Steel with ratings to 3,800 psi at 850 ºF

Swivel Adapters

Temperature ratings: 15,000 psi at 200 ºF and 3,000 psi at 1,000 ºF Used with gauges and gauge valves to adjust the line of sight Rotates 360º to allow the connected instrument to be positioned in the desired direction The pressure connection is achieved with a tapered cone style compression fitting simply by tightening the swivel hex nut All 316 Stainless Steel construction Standard with 1/2" NPT male process - 1/2" NPT female instrument connections Also available with 1/4" NPT connections, same specifications apply Weight approximately 0.8 lb.

Uninstalled Options and Accessories

Certificate of Cleaning (COCL) Certificate of Conformance (COC)

Warranty

1 yr

Working Pressure Limitations

Dynamic Pressure The working pressure should be limited to 60% of the dial range. Max. 0.9x full scale Static Pressure The working pressure, where no sharp fluctuations occur, should be limited to 90% of the dial range. Max. 1x full scale. Short term max. 1.5x full scale (<10,000 psi).