PT-DZ13K

Specifications

Power supply

120 V AC, 9.3 A, 50/60 Hz; 220-240 V AC, 5 A, 50/60 Hz

Power Consumption (120V AC, 50/60Hz)

1,000 W (1,030 VA) (0.2 W with standby mode set to eco. 6 W with standby mode set to normal. Both with fan stopped.)

Power Consumption (220-240V AC, 50/60Hz)

970 W (1,020 VA) (0.3 W with standby mode set to eco. 9 W with standby mode set to normal. Both with fan stopped.)

DLP™ chip Panel size

24.4 mm (0.96 inches) diagonal (16 -10 aspect ratio)

DLP™ Display method

DLP™ chip x 3, DLP™ projection system

DLP™ Pixels

2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels

LENS

Optional powered zoom/focus lenses

Lamp

380 W UHM lamps (x 2) (dual lamp, high mode)

Screen size

1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with the ET-D75LE8), 16 -10 aspect ratio

Brightness

12,000 lumens (dual lamp, high mode)

Center-to-corner uniformity

90%

Contrast

10,000 -1 (full on/full off, in dynamic iris 3 mode)

Resolution

1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.)

Scanning Frequency (SDI)

Dual-link HD-SDI signal (RGB 4 -4 -4 12-bit/10-bit) - SMPTE ST 372 compliant - 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p; Dual-link HD-SDI signal (X' Y' Z' 4 -4 -4 12-bit) - SMPTE ST 372 compliant - 2048 x 1080/24p, 2048 x 1080/24sF; 3G-SDI signal (RGB 4 -4 -4 12-bit/10-bit) - SMPTE ST 424 compliant - 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p; 3G-SDI signal (YPBPR 4 -2 -2 10-bit) - SMPTE ST 424 compliant - 1125(1080)/60p, 1125(1080)/50p; HD-SDI signal (YPBPR 4 -2 -2 10-bit) - SMPTE ST 292 compliant - 750(720)/60p, 750(720)/50p, 1125(1035)/60i, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p; SD-SDI signal (YCBCR 4 -2 -2 10-bit) - SMPTE ST 259 compliant - 525i(480i), 625i(576i)

Scanning Frequency (HDMI/DVI-D/RGB)

Horizontal - 15kHz-100 kHz, vertical - 24 Hz-120 Hz, dot clock - 25MHz-162MHz or lower (HDMI/DVI - 25 MHz-162MHz)

Scanning frequency YPBPR (YCBCR)

525i(480i) - fH 15.75 kHz; fV 60 Hz, 625i(576i) - fH 15.63 kHz; fV 50 Hz, 525p(480p) - fH 31.50 kHz; fV 60 Hz, 625p(576p) - fH 31.25 kHz; fV 50 Hz, 750(720)/60p - fH 45.00 kHz; fV 60 Hz, 750(720)/50p - fH 37.50 kHz; fV 50 Hz, 1125(1035)/60i - fH 33.75 kHz; fV 60 Hz, 1125(1080)/60i - fH 33.75 kHz; fV 60 Hz, 1125(1080)/50i - fH 28.13 kHz; fV 50 Hz, 1125(1080)/25p - fH 28.13 kHz; fV 25 Hz, 1125(1080)/24p - fH 27.00 kHz; fV 24 Hz, 1125(1080)/24sF - fH 27.00 kHz; fV 48 Hz, 1125(1080)/30p - fH 33.75 kHz; fV 30 Hz, 1125(1080)/60p - fH 67.50 kHz; fV 60 Hz, 1125(1080)/50p - fH 56.25 kHz; fV 50 Hz

Scanning Frequency (Video/S-Video)

fH - 15.75 kHz, fV - 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]; fH - 15.63 kHz, fV - 50 Hz [PAL/PAL-N/SECAM]

Optical axis shift Vertical

±55% (±44% with the ET-D75LE6) from center of screen, powered; NOTE - Optical axis shift function cannot be operated when used with the ET-D75LE50.

Optical axis shift Horizontal

±20% (±15% with the ET-D75LE6) from center of screen, powered; NOTE - Optical axis shift function cannot be operated when used with the ET-D75LE50.

Keystone correction range

Vertical ±40°, horizontal ±15° (vertical ±22° and horizontal ±15° with the ET-D75LE5/LE50, vertical ±28° and horizontal ±15° with the ET-D75LE6); When using only the KEYSTONE correction of the Geometric Adjustment function - Vertical ±40°, horizontal ±15°; When using the optional upgrade kit ET-UK20 - Vertical ±40° and horizontal ±40° with the ET-D75LE1/LE2/LE10/LE20, vertical ±45°and horizontal ±40° with the ET-D75LE3/LE4/LE30/LE40, vertical ±22° and horizontal ±15° with the ET-D75LE5/LE50, vertical ±28° and horizontal ±15° with the ET-D75LE6; When using both the KEYSTONE and CURVED corrections of the Geometric Adjustment function - Vertical ±20°, horizontal ±15° (vertical ±8° and horizontal ±8° with the ET-D75LE5/50, vertical ±10° and horizontal ±10° with the ET-D75LE6)

Installation

Ceiling/floor, front/rear

Terminals SDI 1 IN

BNC x 1, Dual-link HD-SDI signal - SMPTE ST 372 compliant (Link-A); 3G-SDI signal - SMPTE ST 424 compliant; HD-SDI signal - SMPTE ST 292 compliant; SD-SDI signal - SMPTE ST 259 compliant

Terminals SDI IN 2

BNC x 1, Dual-link HD-SDI signal - SMPTE ST 372 compliant (Link-B); HD-SDI signal - SMPTE ST 292 compliant; SD-SDI signal - SMPTE ST 259 compliant

Terminals HDMI IN

HDMI 19-pin x 1, Deep Color, compatible with HDCP; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock - 25 MHz-162 MHz; NOTE - Compatible with non-interlaced signals only.

Terminals DVI-D IN

DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock - 25 MHz-162 MHz; NOTE - Compatible with non-interlaced signals only.

Terminals RGB 1 IN

BNC x 5

Terminals RGB 1 IN R, G, B

R - 0.7 Vp-p, 75 ohms; G - 0.7 Vp-p (G - 1.0 Vp-p for sync on G), 75 ohms; B - 0.7 Vp-p, 75 ohms; HD, VD/SYNC - TTL, high impedance, positive/negative automatic; NOTE - SYNC/HD and VD terminals do not accept tri-level sync signals.

Terminals RGB 1 IN Y, PB, PR (Y, CB, CR)

Y - 1.0 Vp-p (including sync signal), PB/PR (CB/CR) - 0.7 Vp-p, 75 ohms

Terminals RGB 1 IN S-Video signal

Y - 1.0 Vp-p, C - 0.286 Vp-p, 75 ohms

Terminals RGB 2 IN

D-sub HD 15-pin (female) x 1

Terminals RGB 2 IN R, G, B

R - 0.7 Vp-p, 75 ohms; G - 0.7 Vp-p (G - 1.0 Vp-p for sync on G), 75 ohms, B - 0.7 Vp-p, 75 ohms HD, VD/SYNC - TTL, high impedance, positive/negative automatic NOTE - SYNC/HD and VD terminals do not accept tri-level sync signals.

Terminals RGB 2 IN Y, PB, PR (Y, CB, CR)

Y - 1.0 Vp-p (including sync signal), PB/PR (CB/CR) - 0.7 Vp-p, 75 ohms

Terminals VIDEO IN

BNC x 1, 1.0 Vp-p, 75 ohms

Terminals 3D SYNC 1 IN/OUT

BNC x 1, 1.0 Vp-p, 75 ohms; Input - TTL, high impedance. Output - TTL, max. 10 mA

Terminals 3D SYNC 2 OUT

BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA

Terminals SERIAL IN

D-sub 9-pin (female) x 1 for external control (RS-232C compliant)

Terminals SERIAL OUT

D-sub 9-pin (male) x 1 for link control (RS-232C compliant)

Terminals Remoter 1 In

M3 jack x 1 for wired remote control

Terminals Remoter 1 Out

M3 jack x 1 for link control

Terminals Remoter 2 In

D-sub 9-pin x 1 for external control (parallel)

Terminals LAN

RJ-45 x 1 for network connection, 100Base-TX/10Base-T, compliant with PJLink™ (class 1)

Power cord length

3.0 m (9 ft 10 in)

Cabinet materials

Molded plastic

Dimensions (W x H x D)

530 x 200 x 548.5 mm (20-7/8 x 7-7/8 x 21-19/32 inches) (without lens)

Weight

24 kg (52.9 lbs) (without lens)

Operation noise

45 dB (high mode), 43 dB (middle mode), 37 dB (eco mode)

Operating temperature

0℃ - 45℃ (32℉ - 113℉)

Operating humidity

10% - 80% (no condensation)

Technology

3-chip DLP

Documents