PT-DZ21K2

Specifications

Brightness

20,000 lumens (four lamp)

Resolution

1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.)

Technology

3-Chip DLP

Power supply

200 - 240 V AC, 12 A, 50/60 Hz (3-wire single-phase)

Power consumption

2,060 W (2,100 VA) (0.3 W with STANDBY MODE set to ECO. 9 W with

DLP™ chip | Panel size

24.4 mm (0.96 inches) diagonal (16 -10 aspect ratio)

DLP™ chip | Display method

DLP™ chip x 3 (R, G, B), DLP™ projection system

DLP™ chip | Pixels

2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels

LENS

Optional powered zoom/focus lenses

Lamp

432 W UHM lamps (x 4) (four lamp system)

Screen size

1.78-25.4 m (70-1,000 inches) (1.78-15.24 m (70-600 inches) with

Center-to-corner uniformity

90%

Contrast

10,000 -1 (full on/full off, in dynamic iris 3 mode)

Scanning frequency | SDI

Dual-link HD-SDI signal (RGB 4 -4 -4 12-bit/10-bit) -

Scanning frequency | HDMI/DVI-D/DIGITAL LINK

Horizontal - 15-100 kHz, vertical - 24-120 Hz,

Scanning frequency | RGB

Horizontal - 15-100 kHz, vertical - 24-120 Hz,

Scanning frequency | YPBPR (YCBCR)

480i (525i) - fH 15.73 kHz; fV 59.94 Hz,

Scanning frequency | Video/Y/C

fH - 15.73 kHz, fV - 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60]

Optical axis shift | Vertical

±55% (±44% with the ET-D75LE6, +73-+78% with the ET-D75LE90)

Optical axis shift | Horizontal

±20% (±15% with the ET-D75LE6, ±6% with the ET-D75LE90)

Keystone correction range

Vertical - ±40° (±22° with the ET-D75LE50, ±28° with the ET-D75LE6,

Installation

Ceiling/floor, front/rear

Terminals | SDI IN 1

BNC x 1,

Terminals | SDI IN 2

BNC x 1,

Terminals | HDMI IN

HDMI 19-pin x 1, Deep Color, compatible with HDCP

Terminals | DVI-D IN

DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible,

Terminals | DIGITAL LINK/LAN

RJ-45 Network connection / digital link connection (video/network/serial

Terminals | RGB 1 IN

BNC x 5

Terminals | RGB 1 IN | R, G, B

R - 0.7 Vp-p, 75 o hms,

Terminals | RGB 1 IN | Y, PB, PR (Y, CB, CR)

Y - 1.0 Vp-p (including sync signal), PB/PR (CB/CR) - 0.7 Vp-p, 75 ohms

Terminals | RGB 1 IN | S-Video signal

Y - 1.0 Vp-p, C - 0.286 Vp-p, 75 ohms

Terminals | RGB 2 IN

D-sub HD 1 5-pin (female) x 1

Terminals | RGB 2 IN | R, G, B

R - 0.7 Vp-p, 75 o hms,

Terminals | RGB 2 IN | Y, PB, PR (Y, CB, CR)

Y - 1.0 Vp-p (including sync signal), PB/PR (CB/CR) - 0.7 Vp-p, 75 ohms

Terminals | 3D SYNC 1 IN/OUT

BNC x 1, 1.0 Vp-p, 75 ohms

Terminals | 3D SYNC 2 OUT

BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA

Terminals | SERIAL IN

D-sub 9-pin (female) x 1 for external control (RS-232C compliant)

Terminals | SERIAL OUT

D-sub 9-pin (male) x 1 for link control

Terminals | Remoter 1 In

M3 jack x 1 for wired remote control

Terminals | Remoter 1 Out

M3 jack x 1 for link control

Terminals | Remoter 2 In

D-sub 9-pin (female) x 1 for external control (parallel)

Power cord length

3.0 m (9 ft 10 in)

Cabinet materials

Molded plastic

Dimensions (W x H x D)

620 x 291 x 800 mm

Weight

Approx. 41 kg (90.4 lbs) (without lens)

Operating noise

46 dB (quad lamp operation)

Operating temperature

0°- 45°C (32°- 113°F)

Operating humidity

10%-80% (no condensation)

Keystone Correction Range with Optional Upgrade Kit

Vertical - ±45° (±40° with the ET-D75LE10/ET-D75LE20,

Documents