PT-FW530

Specifications

Power supply

AC100 - 240V 4.5 - 1.8A 50Hz/60Hz

Power consumption

400W

Power consumption | Standby Mode (Eco)

0.5W, 0.3W (Taiwan)

Power consumption | Standby Mode (Normal)

12W

Power consumption | Standby Mode (Normal and Audio monitor out)

30W

BTU value

Max 1,365 BTU

LCD panel | Panel size

16.3 mm (0.64 in) diagonal (16 -10 aspect ratio)

LCD panel | Display method

Transparent LCD panel (x 3, R/G/B)

LCD panel | Drive method

Active matrix

LCD panel | Pixels

1,024,000 (1,280 x 800) x 3, total of 3,072,000 pixels

LENS

Manual zoom (throw ratio 1.22-2.26 -1),

Lamp

270 W UHM lamp

Screen size

1.02- 7.62 m (40-300 inches) (16 -10 aspect ratio)

Brightness

4,500 lumens

Center-to-corner uniformity

90%

Contrast

10,000 -1

Resolution

1,280 x 800 pixels

Scanning frequency | HDMI/DIGITAL LINK

fH - 15- 91kHz, fV - 24 - 100Hz, dot clock - 25 - 162 MHz

Scanning frequency | RGB

fH - 15- 91kHz, fV - 24 - 100Hz, dot clock - 162 MHz or lower

Scanning frequency | YPBPR (YCBCR)

525i (480i) - fH15.73 kHz; fV59.94 Hz,

Scanning frequency | Video/S-Video

fH - 15.75 kHz, fV - 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60]

Keystone correction range

Vertical ±35°, horizontal ±35°

Optical axis shift

Vertical - ±60% (Manual) Horizontal - ±30% (Manual)

Installation

Ceiling/fl・or, front/rear

Speaker

4.0 cm (1-9/16 in) 10W (monaural) x 1

Terminals | HDMI In 1/HDMI In 2 | HDMI 19-Pin x2

Deep Color, compatible with HDCP,

Terminals | COMPUTER 1 IN

D-sub HD 15-pin (female) x 1

Terminals | COMPUTER 1 IN | R, G, B

0.7 Vp-p, 75 ohms, (G - 1.0 Vp-p, 75 ohms for sync on G)

Terminals | Computer 1 IN | Y, PB, PR (Y, CB, CR)

Y - 1.0 Vp-p (including sync signal),

Terminals | Computer 1 IN | Y/C

Y - 1.0 Vp-p (including sync signal), C - 0.286 Vp-p, 75 ohms

Terminals | COMPUTER 2 IN/COMPUTER 1 OUT

D-sub HD 15-pin (female) x 1

Terminals | COMPUTER 2 IN/COMPUTER 1 OUT | R,G,B

0.7 Vp-p, 75 ohms, (G - 1.0 Vp-p, 75 ohms for sync on G)