PT-RQ32K

Additional Information

Part Number

PT-RQ32K

Specifications

Power supply

100 V - 120 V / 200 V - 240 V - (100 V - 120 V / 200 V - 240 V alternating current), 50 Hz/60 Hz (PT-RQ32K)

Power consumption

50 Hz/60 Hz (PT-RQ32KD)

BTU value

Max 10,079 BTU

LENS

Optional powered zoom/focus lenses.

Light source

Laser Diode Laser class 1

Brightness*4

Varies depending on operation mode setting.

Illumination life of set

Varies depending on operation mode setting.

Center-to-corner uniformity*2

90%

Contrast*2

20,000 -1 (full on/full off, in Dynamic Contrast 3 mode)

Filter life

Varies depending on operation mode setting and environment.

Filter life | Normal filter

4,000 hours (NORMAL)/2,000 hours (HIGH)/ 20,000 hours (LONG LIFE 1/2/3)

Filter life | Long life filter unit

20,000 hours (NORMAL)/4,000 hours (HIGH)/ 40,000 hours (LONG LIFE 1/2/3)

Screen size

1.78-25.4 m (70-1,000 inches) (16 -10 aspect ratio)

Resolution

5120 x3200 pixels when Quad Pixel Drive set to ON

Compatible signal | SDI signal input

SD-SDI signal

Compatible signal | DIGITAL LINK signal input

Moving image signal resolution - 480/60i*5, 576/50i*5 to 4096 x 2160

Compatible signal | HDMI signal input

This is supported when the optional Interface Board for HDMI 2 input (Model No. - ET-MDNHM10) is installed in the slot.

Compatible signal | DVI-D signal input

This is supported when the optional Interface Board for DVI-D 2 input (Model No. - ET-MDNDV10) is installed in the slot.

Optical axis shift | Vertical

±59% (±56% with the ET-D75LE6), (+69-84% with the ET-D75LE95), from center of screen, powered

Optical axis shift | Horizontal

±29% (±19% with the ET-D75LE6), (±21% with the ET-D75LE95), from center of screen, powered

Installation

Ceiling/floor, front /rear, free 360-degree installation

Terminals | SDI IN 1

BNC x 1

Terminals | SDI IN 2

BNC x 1

Terminals | SDI IN 3

BNC x 1

Terminals | SDI IN 4

BNC x 1

Terminals | DIGITAL LINK/LAN

RJ-45 x 1 (for network, DIGITAL LINK connection, 100Base-TX,compatible with Art-Net, PJLink? (class 1), Deep Color, HDCP)

Terminals | MULTI PROJECTOR SYNC IN

BNC x 1, IN - TTL Hi-z

Terminals | MULTI PROJECTOR SYNC OUT

BNC x 1, TTL max10mA

Terminals | SERIAL IN

D-sub 9 pin x 1 for external control (RS-232C compliant)

Terminals | SERIAL OUT

D-sub 9 pin x 1 for link control (RS-232C compliant)

Terminals | Remoter 1 In

M3 stereo mini jack x 1 for wired remote control

Terminals | Remoter 1 Out

M3 stereo mini jack x 1 for link control

Terminals | Remoter 2 In

D-sub 9 pin x 1 for external control (parallel)

Terminals | DC OUT 5V

USB connector (type A) x 2 for power supply only (DC 5V, Max.900mA)

Terminals | Expansion Slot

x 2 (SLOT 1, SLOT 2), SLOT NX(Compatible with Optional Board)

Power cord length

3.0 m (9 ft 10 in) ft

Cabinet materials

Processed metal parts, Molded plastic

Dimensions (W x H x D)

700 x 418*6x1,250 mm

Weight*8

83 kg (183 lbs)

Operation noise*2

49 dB

Operating temperature

Varies depending on operation mode setting.

Operating humidity

10%-80% (no condensation)

Note

1 When the standby mode is set to eco, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only certain commands can be received for external control using the serial terminal.

DLP™ chip | Panel size

22.9mm (0.9 inches) diagonal (16 -10 aspect ratio)

DLP™ chip | Display method

DLP™ chip x 3 (R, G, B), DLP™ projection system

DLP™ chip | Pixels

4,096,000 (2560 x1600) x3, total of 12,288,000 pixels

Brightness

27,000 lumens (center)

Technology

3-chip DLP Laser

Documents