PT-RZ12K

Specifications

Brightness

12,000 lumens

Resolution

1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.)

Lamp

3-Chip DLP Laser

Power supply

AC 100-240 V 50/60 Hz

Power consumption

1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.),

BTU value

Max 4,096 BTU

DLP™ chip | Panel size

24.4 mm (0.96 inches) diagonal (16 -10 aspect ratio)

DLP™ chip | Display method

DLP™ chip x 3 (R, G, B), DLP™ projection system

DLP™ chip | Pixels

2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels

LENS

Optional powered zoom/focus lenses

Light source

Laser Diode (Laser class - Class 1)

Screen size

1.78-25.4 m (70-1,000 inches) (16 -10 aspect ratio)

Center-to-corner uniformity

90%

Contrast

20,000 -1 (full on/full off, in Dynamic Contrast 3 mode)

Scanning frequency | SDI

SD-SDI signal (YCBCR 4 -2 -2 10-bit) -

Scanning frequency | HDMI/DVI-D

Horizontal - 15 kHz-100 kHz, vertical - 24 Hz - 120 Hz,

Scanning frequency | RGB

Horizontal - 15 kHz-100 kHz, vertical - 24 Hz - 120 Hz,

Scanning frequency | YPBPR (YCBCR)

525i (480i) - fH 15.73 kHz; fV 59.94 Hz,

Scanning frequency | Video/Y/C

fH - 15.73 kHz, fV - 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60]

Optical axis shift | Vertical

±55% (±44% with the ET-D75LE6), (+73-78% with the ET-D75LE90),

Optical axis shift | Horizontal

±20% (±15% with the ET-D75LE6), (±6% with the ET-D75LE90),

Keystone correction range

Vertical - ±40° (±22° with the ET-D75LE50, ±28° with the ET-D75LE6, +5° with the ET-D75LE90),

Installation

Ceiling/floor, front/rear

Terminals | SDI IN 1

BNC x 2,

Terminals | HDMI IN

HDMI 19-pin x 1, Deep Color, compatible with HDCP,

Terminals | DVI-D IN

DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only

Terminals | RGB 1 IN

BNC x 5

Terminals | RGB 1 IN | R, G, B

R - 0.7 Vp-p, 75 ohms,

Terminals | RGB 1 IN | Y, PB, PR (Y, CB, CR)

Y - 1.0 Vp-p (including sync signal), PB/PR(CB/CR) - 0.7 Vp-p, 75 ohms

Terminals | RGB 1 IN | Video in

BNC x 1, 1.0 Vp-p 75 ohms

Terminals | RGB 2 IN

D-sub HD 15-pin (female) x 1

Terminals | RGB 2 IN | R, G, B

R - 0.7 Vp-p, 75 ohms,

Terminals | RGB 2 IN | Y, PB, PR (Y, CB, CR)

Y - 1.0 Vp-p (including sync signal), PB/PR (CB/CR) - 0.7 Vp-p, 75 ohms

Terminals | 3D SYNC 1 IN/OUT

BNC x 1, 1.0 Vp-p, 75 ohms

Terminals | 3D SYNC 2 OUT

BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA

Terminals | SERIAL IN

D-sub 9-pin (female) x 1 for external control (RS-232C compliant)

Terminals | SERIAL OUT

D-sub 9-pin (male) x 1 for link control

Terminals | Remoter 1 In

M3 jack x 1 for wired remote control

Terminals | Remoter 1 Out

M3 jack x 1 for link control

Terminals | Remoter 2 In

D-sub 9-pin x 1 for external control (parallel)

Terminals | DIGITAL LINK/LAN

RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink™,100base-tx, Art-Net compatible

Power cord length

3.0 m (9 ft 10 in)

Cabinet materials

Molded plastic

Dimensions (W x H x D)

578 x 323.5 x 740 mm

Weight

44 kg (97.0 lbs) (without lens)

Operating noise

43 dB

Operating temperature

Normal

Applicable software

10%-80% (no condensation)

Technology

3-chip DLP Laser

Documents