PT-RZ970
PT-RZ970U 1-Chip DLP™ Fixed Installation Laser Projector Discontinued
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Specifications
- Power supply
- AC100-240V 3.5A 50/60 Hz
- Power consumption
- 1,050W
- BTU value
- Max 3,584 BTU
- Lens | PT-RZ970B/W
- Powered zoom/focus lenses (1.7-2.4 -1), F 1.7-1.9, f 25.6-35.7 mm
- Lens | PT-RZ970LB/LW
- Optional powered zoom/focus lenses and xed-focus lens
- Light source
- Laser Diode Laser class 1(Class3R for US models)
- Screen size
- 1.27- 15.24 m (50-600 inches) (16 -10 aspect ratio)
- Brightness*3
- 10,000 lumens (Center)*2/ 9,400 lumens*3
- Center-to-corner uniformity*3
- 90%
- Contrast*3
- 10,000 -1 (All White/All Black) (Dynamic Contrast3)
- Resolution
- 1920 × 1200 pixels
- Scanning frequency | SDI
- 3G-SDI signal (RGB 4 -4 -4 12-bit/10-bit) -
- Scanning frequency | HDMI/DVI-D
- fH - 15- 100kHz, fV - 24 - 120Hz, dot clock - 25 - 162 MHz
- Scanning frequency | RGB
- fH - 15- 100kHz, fV - 24 - 120Hz, dot clock - 20 - 162 MHz
- Scanning frequency | YPBPR (YCBCR)
- 525i (480i) - fH 15.73 kHz; fV 59.9 Hz,
- Scanning frequency | Video/S-Video
- fH - 15.73 kHz, fV - 59.9 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
- Optical axis shift
- Vertical - +50%, -16%(powered),
- Installation
- Ceiling/floor, front/rear, 360 degree free installation
- Terminals | SDI IN
- BNC × 1,
- Terminals | HDMI IN
- HDMI 19-pin × 1, Deep Color, compatible with HDCP
- Terminals | DVI-D IN
- DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP,
- Terminals | RGB 1 IN
- BNC × 5
- Terminals | RGB 1 IN | R, G, B
- R - 0.7 Vp-p, 75 ohms,
- Terminals | RGB 1 IN | Y, PB, PR (Y, CB, CR)
- Y - 1.0 Vp-p (including sync signal), PB/PR (CB/CR) - 0.7 Vp-p, 75 ohms
- Terminals | RGB 1 IN | Y/C
- Y - 1.0 Vp-p, C - 0.286 Vp-p, 75 ohms
- Terminals | RGB 1 IN | Video
- 1.0Vp-p, 75 ohms
- Terminals | RGB 2 IN
- D-sub HD 15-pin (female) × 1
- Terminals | RGB 2 IN | R, G, B
- R - 0.7 Vp-p, 75 ohms,
- Terminals | RGB 2 IN | Y, PB, PR (Y, CB, CR)
- Y - 1.0 Vp-p (including sync signal), PB/PR(CB/CR) - 0.7 Vp-p, 75 ohms
- Terminals | SERIAL/MULTI PROJECTOR SYNC IN
- D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
- Terminals | SERIAL/MULTI PROJECTOR SYNC OUT
- D-sub 9-pin (male) x 1 for link control
- Terminals | Remoter 1 In
- M3 jack x 1 for wired remote control
- Terminals | Remoter 1 Out
- M3 jack x 1 for link control (for wired remote control)
- Terminals | Remoter 2 In
- D-sub 9-pin (female) x1 for external control (parallel)
- Terminals | LAN/DIGITAL LINK
- RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control)
- Power cord length
- 3.0 m (9 ft 10 in)
- Cabinet materials
- Molded plastic
- Dimensions (W x H x D)
- PT-RZ970B/RZ970W -
- Weight
- PT-RZ970B/RZ970W -
- Operation noise
- 41dB (37dB[QUIET1] / 35dB[QUIET2])
- Operating temperature
- 0-45 °C (32-113 °F) * 6
- Operating humidity
- 10%-80% (no condensation)
- Note
- 1 When the STANDBY MODE is set to Eco, network functions such as power on over the LAN will not operate.
- Brightness
- 10.000 lumens (centre)/ 9.400 lumens
- Technology
- 1-Chip DLP Laser
- DLP™ chip | Panel size
- 17.0 mm (0.67 in) diagonal (16 -10 aspect ratio)
- DLP™ chip | Display method
- DLP™ chip × 1, DLP™ system
- DLP™ chip | Pixels
- 2,304,000 (1920 × 1200) × 1, total of 1,024,000 pixels