PT-TW380

Specifications

Projector type

LCD projector

LCD panel | Panel size

15.0 mm (0.59 in) diagonal (16 -10 aspect ratio)

LCD Panel | Number of pixels

1,024,000 (1280 x 800 pixels) x 3

Light source

230 W x 1 lamp

Light output

3,300 lm

Lamp replacement cycle*2

Normal - 10,000 h/Eco - 20,000 h/Quiet - 10,000 h

Filter replacement cycle

Normal - 5,000 h/Eco - 6,000 h/Quiet - 10,000 h

Resolution

1280 x 800 pixels

Contrast Ratio*1

20,000 -1 (All white/all black, Iris - On, Image mode - Dynamic, Daylight View - Off, Lamp control - Normal)

Screen size [diagonal]

1.27–2.54 m (50–100 in), 16 -10 aspect ratio

Center-to-corner zone ratio*1

85 %

LENS

Fixed zoom, manual focus lens, F = 1.8, f = 6.08 mm,

Keystone correction range

Vertical - ±15 ° (Auto, Manual), Horizontal - ±15 ° (Manual)

Installation

Ceiling/desk, front/rear

Terminals | HDMI IN 1/HDMI IN 2

HDMI 19-pin x 2 (Compatible with HDCP 1.4, Deep Color), Audio signal - Linear PCM (Sampling frequencies - 48 kHz, 44.1 kHz, 32 kHz)

Terminals | COMPUTER 1 IN

D-sub HD 15-pin (female) x 1 [RGB/YPBPR/YC]

Terminals | Computer 2 IN/1 OUT

D-sub HD 15-pin (female) x 1 [RGB/YPBPR] (Input/output switching)

Terminals | VIDEO IN

Pin jack x 1

Terminals | AUDIO IN 1

M3 (L,R) x 1

Terminals | AUDIO IN 2

Pin jack x 2 (L,R)

Terminals | AUDIO OUT

M3 (L,R) x 1 (Variable)

Terminals | LAN

RJ-45 x 1 for network connection, 10Base-T/100Base-TX, PJLink™ (Class 2) compatible

Terminals | SERIAL IN

D-sub 9-pin (female) x 1 for external control (RS-232C compatible)

Terminals | USB

USB Type-A (for Memory Viewer/Wireless Module [ET-WML100/AJ-WM50 series*3 ]/Power supply [DC 5 V/2 A])

Terminals | Mini USB

x 1 (Mini-USB connector for interactive function)

Power supply

AC 100–240 V, 50/60 Hz

Power consumption

300 W

Built in speaker

10 W monaural

Operation noise*1

Normal - 38 dB, Eco - 35 dB, Quiet - 30 dB

Dimensions (W x H x D)

335 x 134.1*4 x 329 mm (13 3/16˝ x 5 9/32˝*4 x 12 15/16˝ )

Weight*5

Approx. 3.9 kg (8.6 lbs)

Operating environment

Operating temperature*6 - Normal use - 5–40 °C (41–104 °F) at altitudes less than 1,400 m (4,593 ft); 5–35 °C (41–95 °F) at altitudes of 1,400–2,700 m (4,593–8,858 ft); Operating humidity - 20–80 % (No condensation)

Applicable software

Multi Monitoring & Control Software, Early Warning Software, Logo Transfer Software,Presenter Light Software (for Windows®)*7 , Wireless Projector for iOS/Android™*8 , LightPen3 Software for Windows/Mac, Whiteboard Software (for Windows)

Note

1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118 - 2020 international standards. Value is average of all products when shipped. *2 Lamp replacement cycle stated is maximum value, at which time brightness will have decreased to 50 %. Usage environment affects lamp replacement cycle. *3 ET-WML100 Series and AJ-WM50 Series devices are both compatible with all projectors in this series, and either can be used to enable the wireless network function. *4 With legs at shortest position. *5 Average value. May differ depending on the actual unit. *6 When [LAMP POWER] is set to [NORMAL] and the projector is operated at an elevation of 1,400 m (4,593 ft) or less, if the ambient temperature exceeds 35 °C (95 °F), [LAMP POWER] will be switched to [ECO] automatically to protect the projector. When [LAMP POWER] is set to [NORMAL] and the projector is operated at an elevation between 1,400 m (4,593 ft) and 2,700 m (8,858 ft), if the ambient temperature exceeds 30 °C (86 °F), [LAMP POWER] will be switched to [ECO] automatically to protect the projector. *7 When using Presenter Light Software, images are projected with 1280 x 800 dots or 1024 x 768 dots onto the screen. Also, your PC display resolution may be forcibly changed, and audio playback disrupted or become noisy, while images and sound are being transmitted. *8 When using the Wireless Projector app, display resolution differs depending on your iOS/Android ™ device and the display device. The maximum supported display resolution is WXGA (1280 x 800).