1073675

Product definition

Type

DC charging cable

Type

With vehicle charging connector and open cable end

Type

Housing color black-gray

Type

With protective cap

Type

With temperature sensors

Application

For charging electric vehicles (EV) with direct current (DC)

Application

For installation at charging stations for electromobility (EVSE)

Affixed logo

PHOENIX CONTACT' logo

Design

Generation 2

Standards/regulations

GB/T 20234.1-2015, GB/T 20234.3-2015

Charging standard

GB/T

Charging mode

Mode 4

Normative cable length restrictions

NOTE: The cable length exceeds the normative specification of 10 m.

Normative cable length restrictions

Interference-free V2G communication in accordance with ISO 15118 is not guaranteed for cable lengths over 10 m (ISO IEC 15118-3, A.11.3, Table A.11).

Normative cable length restrictions

Cable management is required in certain regions if the cable length exceeds 5.0 m (Switzerland) or 7.5 m (USA) (IEC 61851-1).

Dimensions

Height

137.8 mm (Vehicle charging connector)

Width

77 mm (Vehicle charging connector)

Depth

279.4 mm (Vehicle charging connector)

Conductor length

10 m

Stripping length

150 mm ±20 mm

Electrical properties

Maximum charging power

125 kW

Number of power contacts

3 (PE, DC+, DC-)

Rated current of power contacts

125 A

Rated voltage for power contacts

1000 V DC

Number of signal contacts

6 (S+, S-, A+, A-, CC1, CC2)

Rated current for signal contacts

20 A ((A+, A-))

Rated current for signal contacts

2 A ((S+, S-, CC1, CC2))

Rated voltage for signal contacts

30 V

Type of signal transmission

according to GB/T 27930-2015

Note on the connection method

Crimp connection, cannot be disconnected

Resistor coding

1000 Ω (between PE and CC1 / PE and CC2)

Temperature monitoring

2x Pt 1000

Material

Housing material

Plastic

Material handle area

Soft plastic

Actuating lever material

Metal

Material protective cap

Plastic

Material mating face

Plastic

Flammability rating

V0

Material surface of contacts

Ag

Mechanical properties

Insertion/withdrawal cycles

> 10000

Insertion force

< 100 N

Withdrawal force

< 100 N

Ambient conditions

Ambient temperature (operation)

-30 °C - 50 °C

Ambient temperature (storage/transport)

-40 °C - 80 °C

Max. altitude

5000 m (above sea level)

Degree of protection

IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)

Degree of protection

IP54 (Protective cap)

Locking

Locking type

Locking option for actuating lever with actuators integrated in the Vehicle Connector

Locking current

2 A

Current supply duration

50 ms - 100 ms (NOTE: Continuous current supply > 100 ms damages the locking actuator)

Locking detection

Maximum of 24 V / 14 mA via signal lines Lock Detection+ (WHOG) and Lock Detection- (WHBN)

Locking detection

Spower+ (WHBU) and Spower- (WHPK) must also be supplied with 12 V on a continuous basis

Environmental Product Compliance

China RoHS

Environmentally Friendly Use Period = 10;

China RoHS

For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'

Temperature sensors

Type of sensor

Pt 1000

Standards/regulations

DIN EN 60751

Recommended measured current

1 mA (1 V at 0°C)

Tolerance at the sensor with the recommended measured current

±1K

Temperature range

-50 °C - 130 °C

Temperature coefficient (TCR)

3850 ppm/K

Long-term stability (max. R0-Drift)

0.06 % (After 1000 hours at 130°C)

Shutdown temperature

90 °C equivalent to a Pt 1000 value of 1346.5 Ω

Design

Design line

Standard

Housing color

black

Mating face color

black

Color handle area

gray

Actuating element color

black

Color protective cap

black

Label

14.1 mm x 44.8 mm (customer logo on request)

Customer variations

On request

Cable

Cable structure

2 x 35 mm² + 1 x 25 mm² + 2 × 4 mm² + (2 × 0.75 mm²) P + 10 x 0.75 mm²

Wiring standards/regulations

GB/T 33594-2017

Wiring class

Class 5/6

Wiring certifications

CQC1105-2015

External cable diameter

31.6 mm ±0.4 mm

Type of conductor

straight

Cable resistance

≤ 0.000554 Ω/m (based on a power core, at an ambient temperature of 20°C)

Outer sheath, material

TPU

External sheath, color

black

Minimum bending radius

158 mm (5 x diameter)

CAD Models

Trace parts

Download