Socket Outlet - EV-T2M3SE12-3AC32A-0,3M6,0E10 - 1627628
1627628
  • Get up to 90 days payment terms from 500+ suppliers
  • Reselling discounts up to 40%!
Sign-Up
Send request for price
1
Payment methods:

Product definition

Type
Rear protective cover screw connection
Application
For charging electric vehicles (EV) with alternating current (AC)
Application
Compatible with infrastructure charging plugs
Affixed logo
PHOENIX CONTACT' logo
Design
Generation 1
Standards/regulations
IEC 62196-2
Charging standard
Type 2
Charging mode
Mode 3, Case B
Note on the connection method
Crimp connection, cannot be disconnected
Special packaging quantity
50 Quantity

Dimensions

Height
96 mm
Width
75 mm
Depth
76.2 mm
Bore dimensions
60 mm x 60 mm
Conductor length
0.3 m (AC cables)
Conductor length
0.5 m (Locking actuator cables)
Cable structure
5x 6.0 mm² + 2x 0.5 mm²
Type of conductor
Single wires

Electrical properties

Maximum charging power
22 kW
Type of charging current
AC 3-phase
Number of phases
3
Number of power contacts
5 (L1, L2, L3, N, PE)
Rated current of power contacts
32 A
Rated voltage for power contacts
480 V AC
Number of signal contacts
2 (CP, PP)
Rated current for signal contacts
2 A
Rated voltage for signal contacts
30 V AC
Type of signal transmission
Pulse width modulation
Note on the connection method
Crimp connection, cannot be disconnected

Material

Material
Plastic
Material surface of contacts
Ag

Mechanical properties

Insertion/withdrawal cycles
> 10000
Insertion force
< 100 N
Withdrawal force
< 100 N

Ambient conditions

Ambient temperature (operation)
-30 °C - 50 °C
Ambient temperature (storage/transport)
-40 °C - 80 °C
Max. altitude
5000 m (above sea level)
Degree of protection
IP44 (plugged in)
Degree of protection
IP54 (with protective cover, see accessories)

Locking

Locking type
Locking in the inserted state with a locking mechanism

Locking actuator

Number of positions of theconnectors
4
Operating voltage
12 V (Typical power supply at the motor)
Possible power supply range at the motor
9 V - 16 V
Maximum voltage for locking detection
30 V
Typical motor current for locking
0.2 A
Reverse current of the motor
max. 1 A
Max. dwell time with reverse current
1000 ms
Recommended adaptation time
600 ms
Pause time after entry or exit path
3 s
Service life insertion cycles
> 10000 load cycles
Ambient temperature (operation)
-30 °C - 50 °C
Cable length
0.5 m
Cable structure
4 x 0.5 mm²
Lock recognition
available
Mechanical emergency release
available

Environmental Product Compliance

REACh SVHC
Lead 7439-92-1
China RoHS
Environmentally Friendly Use Period = 10;
China RoHS
For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'

Design

Design line
Generation 1
Housing color
black
Customer variations
On request

Mounting

Possible mounting positions
Rear panel mounting
Possible mounting positions
Front mounting only possible when the locking actuator is removed (see EV-T2M3SE...E00 versions)
Restrictions to mounting position
Only 0 to 90 degree frontal inclination possible, see figure
Mounting position of the locking actuator
Top center
Screw connection of a protective cover
Only rear mounting possible
Max. wall thickness
max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
Max. wall thickness
max. 28 mm (Rear mounting, normative maximum specification for infrastructure plug when using protective cover 1405217)
Max. wall thickness
max. 10 mm (Front mounting, when using the locking mechanism)
Mounting hole diameter
7.00 mm (ø)