2700575

Relay outputs- enabling current path

Output name

Enabling current paths

Output name

13/14, 23/24

Output description

safety-related N/O contacts

Number of outputs

2 (undelayed)

Contact type

2 enabling current paths

Contact material

AgSnO₂ (enabling current path)

Switching voltage

min. 12 V AC/DC

Switching voltage

max. 250 V AC/DC (Observe the load curve)

Limiting continuous current

6 A (observe derating)

Inrush current

min. 3 mA

Inrush current

max. 6 A

Sq. Total current

72 A² (observe derating)

Switching capacity

min. 60 mW

Switching frequency

1 Hz

Mechanical service life

10x 10⁶ cycles

Output fuse

6 A gL/gG (N/O contact)

Note

Utilization restriction

EMC: class A product, see manufacturer's declaration in the download area

Dimensions

Width

12.5 mm

Height

116.6 mm

Depth

114.5 mm

Digital inputs

Input name

Sensor circuit

Input name

S12, S22

Description of the input

safety-related sensor inputs

Number of inputs

2

Inrush current

< 10 mA (with Us/Ix to S12/S22)

Current consumption

< 4.2 mA (with Us/Ix to S12/S22)

Max. permissible overall conductor resistance

150 Ω

Concurrence input 1/2

< 0.5 s

Input name

Feedback circuit

Input name

S35

Description of the input

non-safety-related

Number of inputs

1

Inrush current

< 5.5 mA (typically with US)

Current consumption

< 5.1 mA (typically with US)

Ambient conditions

Ambient temperature (operation)

-35 °C - 60 °C (observe derating)

Ambient temperature (storage/transport)

-40 °C - 85 °C

Max. permissible relative humidity (operation)

75 % (on average, 85% infrequently, non-condensing)

Max. permissible humidity (storage/transport)

75 % (on average, 85% infrequently, non-condensing)

Maximum altitude

≤ 2000 m (Above sea level)

Connection capacity

Connection method

Push-in spring connection

Pluggable

Yes

Conductor cross section solid

0.2 mm² - 1.5 mm²

Conductor cross section flexible

0.2 mm² - 1.5 mm²

Conductor cross section AWG / kcmil

24 - 16

Conductor cross section flexible, with ferrule without plastic sleeve

0.25 mm² - 1.5 mm² (only together with CRIMPFOX 6)

Conductor cross section, flexible, with ferrule, with plastic sleeve

0.25 mm² - 1.5 mm² (only together with CRIMPFOX 6)

Cylindrical gauge a x b / diameter

2.4 mm x 1.5 mm / 1.9 mm

Stripping length

8 mm

Environmental Product Compliance

REACh SVHC

Lead 7439-92-1

China RoHS

Environmentally Friendly Use Period = 50 years

China RoHS

For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'

Alarm outputs

Designation

M1

Output description

PNP

Output description

non-safety-related

Number of outputs

1 (digital, PNP)

Voltage

22 V DC (Us - 2 V)

Current

max. 100 mA

Maximum inrush current

500 mA (Δt = 1 ms at Us)

Short-circuit protection

Yes

Times

Typical response time at US

< 50 ms

Typical release time at US

< 10 ms (when controlled via S12/S22)

Typical release time at US

< 5 ms (when interrupted via A1; applicative deactivation via A1/A2 is not permitted)

Restart time

< 2 s (Boot time)

Recovery time

< 500 ms

Standards and Regulations

Designation

Air clearances and creepage distances between the power circuits

Standards/regulations

DIN EN 50178

Rated insulation voltage

250 V AC

Rated surge voltage/insulation

Basic insulation 4 kV between all current paths and housing

Rated surge voltage/insulation

Safe isolation, reinforced insulation 6 kV: between (A1, A2, S11, S12, S21, S22, S35, M1) and enabling current path (13/14) between (A1, A2, S11, S12, S21, S22, S35, M1) and enabling current path (23/24) between enabling current paths

Degree of pollution

2

Overvoltage category

III

Shock

15g

Vibration (operation)

10 Hz - 150 Hz, 2g

Conformance

CE-compliant

Safety-related characteristic data

Stop category

0

Type class

IIIC

Designation

IEC 61508 - High demand

Safety Integrity Level (SIL)

3 (4 A DC13; 5 A AC15; 8760 switching cycles/year)

Designation

EN ISO 13849

Performance level (PL)

e (4 A DC13; 5 A AC15; 8760 switching cycles/year)

Category

4 (4 A DC13; 5 A AC15; 8760 switching cycles/year)

Designation

EN 62061

Safety Integrity Level Claim Limit (SIL CL)

3 (4 A DC13; 5 A AC15; 8760 switching cycles/year)

Power supply

Designation

A1/A2

Rated control circuit supply voltage US

24 V DC -20 % / +25 %

Rated control circuit supply voltage US

19.2 V DC - 30 V DC

Rated control supply current IS

typ. 40 mA

Power consumption at US

typ. 0.96 W

Inrush current

typ. 20 A (Δt = 10 µs at Us)

Filter time

10 ms (For the logic. At A1 in the event of voltage dips at Us )

Protective circuit

Surge protection Suppressor diode

Protective circuit

Protection against polarity reversal for rated control circuit supply voltage

CAD Models

Trace parts

Download