Phoenix Contact
2902039
Signal conditioner - MINI MCR-2-UI-UI-PT-C - 2902039
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Input data
- Number of inputs
- 1
- Configurable/programmable
- Yes
- Voltage input signal
- 0 V - 5 V (via DIP switch)
- Voltage input signal
- 1 V - 5 V (via DIP switch)
- Voltage input signal
- -5 V - 5 V (via DIP switch)
- Voltage input signal
- 0 V - 10 V (via DIP switch)
- Voltage input signal
- 2 V - 10 V (via DIP switch)
- Voltage input signal
- -10 V - 10 V (via DIP switch)
- Voltage input signal
- 0 V - 20 V (via DIP switch)
- Voltage input signal
- 4 V - 20 V (via DIP switch)
- Voltage input signal
- -20 V - 20 V (via DIP switch)
- Voltage input signal
- 0 V - 24 V (via DIP switch)
- Voltage input signal
- 4.8 V - 24 V (via DIP switch)
- Voltage input signal
- -24 V - 24 V (via DIP switch)
- Voltage input signal
- 0 V - 30 V (via DIP switch)
- Voltage input signal
- 6 V - 30 V (via DIP switch)
- Voltage input signal
- -30 V - 30 V (via DIP switch)
- Current input signal
- 0 mA - 20 mA (via DIP switch)
- Current input signal
- 4 mA - 20 mA (via DIP switch)
- Current input signal
- -20 mA - 20 mA (via DIP switch)
- Max. input voltage
- 33 V
- Max. input current
- 24 mA
- Input resistance of voltage input
- > 1000 kΩ
- Input resistance current input
- approx. 63 Ω (+ 0.7 V for test diode)
Note
- Utilization restriction
- EMC: class A product, see manufacturer's declaration in the download area
Dimensions
- Width
- 6.2 mm
- Height
- 109.81 mm
- Depth
- 119.2 mm
Connection data
- Connection method
- Push-in connection
- Stripping length
- 10 mm
- Conductor cross section solid
- 0.2 mm² - 2.5 mm² (with ferrule)
- Conductor cross section solid
- 0.14 mm² - 2.5 mm² (without ferrule)
- Conductor cross section flexible
- 0.14 mm² - 2.5 mm²
- Conductor cross section AWG
- 24 - 12 (flexible)
Output data
- Number of outputs
- 1
- Configurable/programmable
- Yes
- Voltage output signal
- 0 V - 5 V (via DIP switch)
- Voltage output signal
- 1 V - 5 V (via DIP switch)
- Voltage output signal
- -5 V - 5 V (via DIP switch)
- Voltage output signal
- 0 V - 10 V (via DIP switch)
- Voltage output signal
- 2 V - 10 V (via DIP switch)
- Voltage output signal
- -10 V - 10 V (via DIP switch)
- Current output signal
- 0 mA - 20 mA (via DIP switch)
- Current output signal
- 4 mA - 20 mA (via DIP switch)
- Max. output current
- 22 mA
- Short-circuit current
- < 32 mA
- Load/output load voltage output
- ≥ 10 kΩ
- Load/output load current output
- ≤ 600 Ω (at 20 mA)
- Ripple
- < 20 mVPP (at 600 Ω)
Ambient conditions
- Ambient temperature (operation)
- -40 °C - 70 °C
- Ambient temperature (storage/transport)
- -40 °C - 85 °C
- Permissible humidity (operation)
- 5 % - 95 % (non-condensing)
- Degree of protection
- IP20 (not assessed by UL)
- Noise immunity
- EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Environmental Product Compliance
- REACh SVHC
- Lead 7439-92-1
- China RoHS
- Environmentally Friendly Use Period = 50 years
- China RoHS
- For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'
EMC data
- Designation
- Electromagnetic RF field
- Standards/regulations
- EN 61000-4-3
- Designation
- Fast transients (burst)
- Standards/regulations
- EN 61000-4-4
- Designation
- Conducted interferences
- Standards/regulations
- EN 61000-4-6
Standards and Regulations
- Electromagnetic compatibility
- Conformance with EMC directive
- Noise emission
- EN 61000-6-4
- Standards/regulations
- EN 61000-4-2
- Designation
- Electromagnetic RF field
- Standards/regulations
- EN 61000-4-3
- Standards/regulations
- EN 61000-4-4
- Standards/regulations
- EN 61000-4-5
- Designation
- Conducted interferences
- Standards/regulations
- EN 61000-4-6
- Electrical isolation
- Reinforced insulation in accordance with IEC 61010-1
Power supply
- Nominal supply voltage
- 24 V DC
- Supply voltage range
- 9.6 V DC - 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Typical current consumption
- 25 mA (Current output, at 24 V DC incl. load)
- Typical current consumption
- 54 mA (Current output, at 12 V DC incl. load)
- Power consumption
- ≤ 800 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
Related products
Other Categories
NanometersManometersFlowmetersSensorsAcceleration SensorsFiber Optic SensorsDetectorsUltrasonic SensorsTemperature & Humidity SensorsVibration SensorsLevel SensorsPressure SensorsProximity SensorsInductive SensorsMotion SensorsMagnetic Sensors GroupOptical SensorsCapacitive SensorsPhotoelectric SensorsPosition SensorsEncodersOther sensors and Accessories