Phoenix Contact
2902060
Loop-powered isolators - MINI MCR-2-UI-I-OLP-C - 2902060
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Input data
- Number of inputs
- 1
- Configurable/programmable
- Yes
- Max. input current
- 50 mA (Dielectric strength up to 30 V)
- Input resistance of voltage input
- approx. 100 kΩ (At ≤ 1 V, otherwise approximately 1 MΩ)
- Input resistance current input
- 25 Ω (+ 0.7 V for test diode)
Note
- Utilization restriction
- EMC: class A product, see manufacturer's declaration in the download area
Dimensions
- Width
- 6.2 mm
- Height
- 109.81 mm
- Depth
- 119.2 mm
Connection data
- Connection method
- Screw connection
- Stripping length
- 10 mm
- Screw thread
- M3
- Conductor cross section solid
- 0.2 mm² - 1.5 mm² (with ferrule)
- Conductor cross section solid
- 0.14 mm² - 2.5 mm² (without ferrule)
- Conductor cross section flexible
- 0.14 mm² - 2.5 mm²
- Conductor cross section AWG
- 24 - 12 (flexible)
- Torque
- 0.5 Nm - 0.6 Nm
Output data
- Number of outputs
- 1
- Current output signal
- 4 mA - 20 mA
- Max. output current
- 32 mA
- Load/output load current output
- < 1000 Ω ((UB - 8 V) / 22 mA)
- Ripple
- < 10 mVrms (at 600 Ω)
Ambient conditions
- Ambient temperature (operation)
- -40 °C - 70 °C
- Ambient temperature (storage/transport)
- -40 °C - 85 °C
- Maximum altitude
- ≤ 2000 m
- Permissible humidity (operation)
- 5 % - 95 % (non-condensing)
- Degree of protection
- IP20 (not assessed by UL)
- Noise immunity
- EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Environmental Product Compliance
- REACh SVHC
- Lead 7439-92-1
- China RoHS
- Environmentally Friendly Use Period = 50 years
- China RoHS
- For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'
Standards and Regulations
- Electromagnetic compatibility
- Conformance with EMC directive
- Noise emission
- EN 61000-6-4
- Electrical isolation
- Reinforced insulation in accordance with IEC 61010-1
Power supply
- Supply voltage range
- 8 V DC - 30 V DC (no separate supply voltage necessary)
- Typical current consumption
- ≤ 20 mA
- Power consumption
- ≤ 600 mW
Other Categories
NanometersManometersFlowmetersSensorsAcceleration SensorsFiber Optic SensorsDetectorsUltrasonic SensorsTemperature & Humidity SensorsVibration SensorsLevel SensorsPressure SensorsProximity SensorsInductive SensorsMotion SensorsMagnetic Sensors GroupOptical SensorsCapacitive SensorsPhotoelectric SensorsPosition SensorsEncodersOther sensors and Accessories