- Contact type
- 1 PDT
- Type of switch contact
- Single contact
- Contact material
- AgSnO
- Maximum switching voltage
- 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
- Minimum switching voltage
- 5 V (at 100 mA)
- Min. switching current
- 10 mA (at 12 V)
- Maximum inrush current
- 10 A (4 s)
- Limiting continuous current
- 6 A
- Interrupting rating (ohmic load) max.
- 140 W (at 24 V DC)
- Interrupting rating (ohmic load) max.
- 20 W (at 48 V DC)
- Interrupting rating (ohmic load) max.
- 18 W (at 60 V DC)
- Interrupting rating (ohmic load) max.
- 23 W (at 110 V DC)
- Interrupting rating (ohmic load) max.
- 40 W (at 220 V DC)
- Interrupting rating (ohmic load) max.
- 1500 VA (for 250 V AC)
- Switching capacity
- 2 A (at 24 V, DC13)
- Switching capacity
- 0.2 A (at 110 V, DC13)
- Switching capacity
- 0.1 A (at 220 V, DC13)
- Switching capacity
- 3 A (at 24 V, AC15)
- Switching capacity
- 3 A (at 120 V, AC15)
- Switching capacity
- 3 A (at 230 V, AC15)