Phoenix Contact
2909886
Limit value switches - MINI MCR-2-UI-REL-C - 2909886
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Input data
- Configurable/programmable
- Yes
- Voltage input signal
- 0 V - 10 V (via DIP switch)
- Voltage input signal
- 0 V - 12 V (can be set via software)
- Current input signal
- 0 mA - 20 mA (via DIP switch)
- Current input signal
- 0 mA - 24 mA (can be set via software)
- Max. input voltage
- 12 V
- Max. input current
- 24 mA
- Input resistance of voltage input
- > 120 kΩ
- Input resistance current input
- approx. 50 Ω
Note
- Utilization restriction
- EMC: class A product, see manufacturer's declaration in the download area
Dimensions
- Width
- 6.2 mm
- Height
- 109.81 mm
- Depth
- 119.2 mm
Connection data
- Connection method
- Screw connection
- Stripping length
- 10 mm
- Screw thread
- M3
- Conductor cross section solid
- 0.2 mm² - 1.5 mm² (with ferrule)
- Conductor cross section solid
- 0.14 mm² - 2.5 mm² (without ferrule)
- Conductor cross section flexible
- 0.14 mm² - 2.5 mm²
- Conductor cross section AWG
- 24 - 12 (flexible)
- Torque
- 0.5 Nm - 0.6 Nm
Ambient conditions
- Ambient temperature (operation)
- -40 °C - 70 °C
- Ambient temperature (storage/transport)
- -40 °C - 85 °C
- Permissible humidity (operation)
- 5 % - 95 % (non-condensing)
- Degree of protection
- IP20 (not assessed by UL)
- Noise immunity
- EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Environmental Product Compliance
- REACh SVHC
- Lead 7439-92-1
- China RoHS
- Environmentally Friendly Use Period = 50 years
- China RoHS
- For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'
Switching output
- Output name
- Relay output
- Contact type
- 1 PDT
- Contact material
- AgSnO₂, hard gold-plated
- Maximum switching voltage
- 250 V AC
- Maximum switching voltage
- 240 V AC (UL)
- Limiting continuous current
- 6 A AC
- Limiting continuous current
- 4 A DC
- Min. switching current
- 100 mA (12 V DC)
- Mechanical service life
- 2x 10⁷ cycles
- Setting range of the response delay
- 0 s - 10 s (can be set freely via software)
- Internal hysteresis
- can be set freely via software
- Max. switching current
- 6 A AC (250 V AC)
- Max. switching current
- 4 A DC (30 V DC)
Standards and Regulations
- Electromagnetic compatibility
- Conformance with EMC directive
- Noise emission
- EN 61000-6-4
- Electrical isolation
- Reinforced insulation in accordance with IEC 61010-1
- Conformance
- CE-compliant
- UL, USA/Canada
- UL 508 Listed
- UL, USA/Canada
- Class I, Div. 2, Groups A, B, C, D T4A
- UL, USA/Canada
- Class I, Zone 2, Group IIC T4A
- DNV GL-Temperature
- B
- DNV GL-Humidity
- B
- DNV GL-Vibration
- A
- DNV GL-EMC
- A
- DNV GL-Enclosure
- Required protection according to the Rules shall be provided upon installation on board
Power supply
- Nominal supply voltage
- 24 V DC
- Supply voltage range
- 9.6 V DC - 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
- Typical current consumption
- 40 mA (12 V DC)
- Typical current consumption
- 20 mA (24 V DC)
- Power consumption
- ≤ 0.5 W
Related products
Other Categories
NanometersManometersFlowmetersSensorsAcceleration SensorsFiber Optic SensorsDetectorsUltrasonic SensorsTemperature & Humidity SensorsVibration SensorsLevel SensorsPressure SensorsProximity SensorsInductive SensorsMotion SensorsMagnetic Sensors GroupOptical SensorsCapacitive SensorsPhotoelectric SensorsPosition SensorsEncodersOther sensors and Accessories