Honeywell
M7285Q1024/U
Rotary Actuators, Modutrol IV Motor, 6.8Nm, 24VAC, input 4..20mA, Spring Return
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Additional Information
- Part Number
- M7285Q1024/U
Specifications
- Valve Compatibility
- Globe valves with Q5001 linkage
- Switch Configuration
- SPDT
- Supply Voltage Frequency
- 50 Hz ; 60 Hz
- Shaft Mounting
- Adaptable using crank arm or linkage
- Regulatory Approvals
- ApprovalsCTick: ApprovalsUnderwritersLaboratoriesInc: Listed: File No. E4436, Guide No. XAPX for USA and CanadaApprovalsCanadianStandardsAssociation: ApprovalsCE: EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)
- Power Loss Action
- Spring return
- Overall Width
- 5.5 in ; 140 mm
- Overall Height
- 6.4375 in ; 164 mm
- Overall Depth
- 8.75 in ; 222 mm
- NEMA Rating
- NEMA 3
- Mounting Style
- Foot-mounted
- Model
- Series 2
- Spring Return
- Yes
- Minimum Operating Ambient Temperature
- -40 °F ; -40 °C
- Runtime
- 30 to 53 s
- Maximum Operating Humidity
- 85 %rh
- Maximum Operating Ambient Temperature
- 150 °F ; 60 °C
- Manual Override Included
- No
- IP Rating
- IP44 Weather protection kit is available as accessory to upgrade to IP54
- Number of End Switches
- 2
- Internal Auxiliary Switch Voltage
- 120 V AC ; 240 V AC
- Internal Auxiliary Switch Current
- 120 Vac-- 7.2 AFL / 43.2 ALR ; 240 Vac-- 3.6 AFL / 21.6 ALR
- Input Signal
- 4 … 20 mA
- Includes
- Screw terminals
- Housing Material
- Die-cast Aluminum
- Fire & Smoke Rating
- No
- Feedback Included
- No
- Features
- Adjustable zero and span ; Adjustible stroke, 90° to 160° Asymmetrical
- Driving Power Consumption
- 34 VA
- Damper Compatibility
- With crankarm and linkage
- Connection Type
- Screw terminals
- Compatible with External Auxiliary Switches
- Yes, Q607
- Built In Rotation Limiter
- No
- Application
- HVAC
- Angle of Rotation
- 90 °
- Torque
- 60 in·lb ; 6.8 Nm
- Supply Voltage
- 24 V AC
- Control Signal
- Modulating (4-20 mA)
- Additional Description
- Modutrol IV Motors are spring return and non-spring return motors used to control dampers and valves. M62xx models are three-wire floating control motors for use with controllers that provide a switched spdt or floating output and have an internal electrically isolated feedback potentiometer that provides indication of the motor shaft position.; M72xx models accept a current or voltage signal from an electronic controller to position the motor shaft to any point between open and closed.; M91xx and M94xx models use a 135 Ohm modulating proportional signal to position the motor shaft to any point between open and closed. ; Modutrol IV Servo Motors ; Modutrol IV motors are used for damper and valve control in industrial burner applications and air handling installations. ; Modutrol motor timings are independent of line frequency.; Torque ratings for dual-ended shaft motors are the sum of the shaft torques (power-end torque plus auxiliary-end torque).; Breakaway torque is the maximum torque available to overcome occasional large loads such as a seized damper or valve. The breakaway torque is 1.5x the normal rated torque.; Other models than listed in this catalogue are available outside Europe. Most models can be replaced by the available European models.
Documents
Data Sheet
DownloadOther Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther