Panasonic
PT-RZ12K
PT-RZ12KU 3-Chip DLP™ Large Venue Laser Projector
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Additional Information
- Part Number
- PT-RZ12K
Specifications
- Brightness
- 12,000 lumens
- Resolution
- 1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.)
- Lamp
- 3-Chip DLP Laser
- Power supply
- AC 100-240 V 50/60 Hz
- Power consumption
- 1,200 W (1,280 VA) (0.3 W with STANDBY MODE set to ECO. 4 W with STANDBY MODE set to NORMAL.),
- BTU value
- Max 4,096 BTU
- DLP™ chip | Panel size
- 24.4 mm (0.96 inches) diagonal (16 -10 aspect ratio)
- DLP™ chip | Display method
- DLP™ chip x 3 (R, G, B), DLP™ projection system
- DLP™ chip | Pixels
- 2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels
- LENS
- Optional powered zoom/focus lenses
- Light source
- Laser Diode (Laser class - Class 1)
- Screen size
- 1.78-25.4 m (70-1,000 inches) (16 -10 aspect ratio)
- Center-to-corner uniformity
- 90%
- Contrast
- 20,000 -1 (full on/full off, in Dynamic Contrast 3 mode)
- Scanning frequency | SDI
- SD-SDI signal (YCBCR 4 -2 -2 10-bit) -
- Scanning frequency | HDMI/DVI-D
- Horizontal - 15 kHz-100 kHz, vertical - 24 Hz - 120 Hz,
- Scanning frequency | RGB
- Horizontal - 15 kHz-100 kHz, vertical - 24 Hz - 120 Hz,
- Scanning frequency | YPBPR (YCBCR)
- 525i (480i) - fH 15.73 kHz; fV 59.94 Hz,
- Scanning frequency | Video/Y/C
- fH - 15.73 kHz, fV - 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
- Optical axis shift | Vertical
- ±55% (±44% with the ET-D75LE6), (+73-78% with the ET-D75LE90),
- Optical axis shift | Horizontal
- ±20% (±15% with the ET-D75LE6), (±6% with the ET-D75LE90),
- Keystone correction range
- Vertical - ±40° (±22° with the ET-D75LE50, ±28° with the ET-D75LE6, +5° with the ET-D75LE90),
- Installation
- Ceiling/floor, front/rear
- Terminals | SDI IN 1
- BNC x 2,
- Terminals | HDMI IN
- HDMI 19-pin x 1, Deep Color, compatible with HDCP,
- Terminals | DVI-D IN
- DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only
- Terminals | RGB 1 IN
- BNC x 5
- Terminals | RGB 1 IN | R, G, B
- R - 0.7 Vp-p, 75 ohms,
- Terminals | RGB 1 IN | Y, PB, PR (Y, CB, CR)
- Y - 1.0 Vp-p (including sync signal), PB/PR(CB/CR) - 0.7 Vp-p, 75 ohms
- Terminals | RGB 1 IN | Video in
- BNC x 1, 1.0 Vp-p 75 ohms
- Terminals | RGB 2 IN
- D-sub HD 15-pin (female) x 1
- Terminals | RGB 2 IN | R, G, B
- R - 0.7 Vp-p, 75 ohms,
- Terminals | RGB 2 IN | Y, PB, PR (Y, CB, CR)
- Y - 1.0 Vp-p (including sync signal), PB/PR (CB/CR) - 0.7 Vp-p, 75 ohms
- Terminals | 3D SYNC 1 IN/OUT
- BNC x 1, 1.0 Vp-p, 75 ohms
- Terminals | 3D SYNC 2 OUT
- BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
- Terminals | SERIAL IN
- D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
- Terminals | SERIAL OUT
- D-sub 9-pin (male) x 1 for link control
- Terminals | Remoter 1 In
- M3 jack x 1 for wired remote control
- Terminals | Remoter 1 Out
- M3 jack x 1 for link control
- Terminals | Remoter 2 In
- D-sub 9-pin x 1 for external control (parallel)
- Terminals | DIGITAL LINK/LAN
- RJ-45 Network connection / digital link connection (video/network/serial control) compliant with PJLink™,100base-tx, Art-Net compatible
- Power cord length
- 3.0 m (9 ft 10 in)
- Cabinet materials
- Molded plastic
- Dimensions (W x H x D)
- 578 x 323.5 x 740 mm
- Weight
- 44 kg (97.0 lbs) (without lens)
- Operating noise
- 43 dB
- Operating temperature
- Normal
- Applicable software
- 10%-80% (no condensation)
- Technology
- 3-chip DLP Laser
Documents
Data Sheet
DownloadOther Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther