Rittal

3311490

Liquid Cooling Unit
3311490
  • Get up to 90 days payment terms from 500+ suppliers
  • Reselling discounts up to 40%!
Sign-Up
Send request for price
1
Payment methods:

Additional Information

Part Number
3311490

Specifications

Benefits
Space-saving solution by installing the indoor unit in the VX IT server enclosure or in the Micro Data Center, Maximum energy efficiency due to EC fan technology and IT-based control, Control of the server inlet temperature, The inverter-controlled compressor matches the cooling output to the current level of heat loss in the enclosure, Absorbed thermal energy is emitted directly into the ambient air at the location of the (inverter controlled) external unit , without heating up the installation room
Duty cycle
1
Function principle
The device supports "front to back" air routing typical of IT applications, and regulates the server inlet temperature to the set value
Installation options in VX
["19" profile rails, standard or dynamic, must be off-centered by 50 mm in regards to width","The distance between the front of the 19" profile rails and the front edge of the VX frame must be at least 100 mm","Two system chassis for the inner mounting level are required to fasten the internal unit","Air baffle plates are required to separate the hot/cold zones within an enclosure","A base/plinth is needed to route cables downwards"]
Material
Carbon steel, spray finished
Max. cooling output
3 kW
Modulation range
13kW
Note
If the cooling output falls below its minimum value, fluctuations in the air intake temperature may result, The electrical connection is made to the external unit, the internal unit is supplied by the external unit
Operating temperature
The specified operating temperature applies to the external unit
Packaging unit
1 pc(s).
Pre-fuse
16 A
Protection category IP to EN 60 529
Internal unit IP 20, External unit IP X4
Protection category IP to IEC 60 529
Internal unit IP 20, External unit IP X4
Rated current
7A
Rated operating voltage
230 V, 1~, 50 Hz
Supply includes
Internal unit (condenser)External unit (inverter controlled)482.6 mm (19") mounting bracket cover with control and display elementsCondensate hose
Type of connection (electrical)
Connection clamp
Version
LCU DX 3 kW
Weight/packaging unit
116 kg