Schmersal
101091836
BN 85-R
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Product Conditions:
Additional Information
- Part Number
- 101091836
- ETIM
- Group Code : EG000026
- Group Description : Sensors
- Class Description : Magnetic proximity switch
- Class Code : EC002544
- Version : 7
Electrical data
- Switching voltage, maximum
- 60 VDC
- Switching current, maximum
- 1 A
- Switching capacity, maximum
- 30 W
- Switching element
- bistable contact
- Bounce duration, maximum
- 0.2 ms
Note
- Note (General)
- The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.
Mechanical data - Dimensions
- Length of sensor
- 16.5 mm
- Width of sensor
- 40 mm
- Height of sensor
- 35 mm
Scope of delivery
- Scope of delivery
- Actuator must be ordered separately.
Electrical data - Digital Output
- Design of control elements
- Reed contacts
General data - Features
- Latching
- Yes
- Suitable for elevators
- Yes
- Number of snap-in contacts
- 1
General data
- Working principle
- Magnetic drive
- Housing construction form
- Block
- Enclosure material
- Glass-fibre, reinforced thermoplastic
- Gross weight
- 40 g
Ambient conditions
- Degree of protection
- IP40
- Ambient temperature
- +0 ... +75 °C
- Restistance to shock
- 60 g, on sine wave oscillation
Mechanical data - Connection technique
- Termination
- Cable
- Length of cable
- 1 m
- Wire cross-section
- 0.75 mm
- Wire cross-section
- 18 AWG
- Material of the Cable mantle
- LiY
Mechanical data - Switching distances according EN IEC 60947-5-3
- Switching distance S
- 2 mm … 40 mm | BP 6S = 2 … 12 mm | BP 8S = 2 … 10 mm | BP 10S = 5 … 20 mm | 2 x BP 10S = 6 … 27 mm | BP 15S = 5 … 22 mm | 2 x BP 15S = 7 … 28 mm | BP 34S = 10 … 40 mm | BP 20S = 3 ... 28 mm | BP 31S = 4 ... 30 mm | BP 11S = 4 ... 23 mm | BP 12S = 5 ... 27 mm
- Note (Switching distance Sn)
- Actuating distance up to 40 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.
Mechanical data
- Actuating panels
- front side
- Actuating element
- Magnet
- Mechanical life, minimum
- 1,000,000,000 Operations
- Actuating speed, maximum
- 18 m/s
- Mounting
- clamping foot and 2 single wires
Accessory
- Recommendation (actuator)
- BP 10 S | 2x BP 10 S | BP 15 S | BP 34 S | BP 20 S | BP 31 S | BP 11 S | BP 12 S | BP 6 S | BP 8 S | 2 x BP 15 S
- Recommendation (actuator, lift switchgear)
- BP 10 | BP 6 | 2 x BP 15 | 2 x BP 10 | BP 15 | BP 34
Other Categories
NanometersManometersFlowmetersSensorsAcceleration SensorsFiber Optic SensorsDetectorsUltrasonic SensorsTemperature & Humidity SensorsVibration SensorsLevel SensorsPressure SensorsProximity SensorsInductive SensorsMotion SensorsMagnetic Sensors GroupOptical SensorsCapacitive SensorsPhotoelectric SensorsPosition SensorsEncodersOther sensors and Accessories