Schmersal
101101263
BN 12-10Z
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Product Conditions:
Electrical data
- Switching voltage, maximum
- 200 VAC
- Switching current, maximum
- 1 A
- Switching capacity, maximum
- 30 W
- Switching capacity, maximum
- 30 VA
- Switching element
- Normally open contact (NO)
- Bounce duration, maximum
- 0.2 ms
- Switching frequency, maximum
- 300 Hz
Note
- Note (General)
- The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. | When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). This does not apply to the bistable contact. | The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm.
Mechanical data - Dimensions
- Diameter of sensor
- 10.7 mm
- Length of sensor
- 71 mm
Scope of delivery
- Scope of delivery
- Actuator must be ordered separately.
Electrical data - Digital Output
- Design of control elements
- Reed contacts
General data - Features
- Suitable for elevators
- Yes
- Bias magnet
- Yes
- Number of normally open (NO)
- 1
General data
- Working principle
- Magnetic drive
- Housing construction form
- Cylinder, thread
- Enclosure material
- Metal film
- Gross weight
- 60 g
Ambient conditions
- Degree of protection
- IP67
- Ambient temperature
- -25 ... +70 °C
- Resistance to vibrations
- 10 … 55 Hz, amplitude 1 mm
- Restistance to shock
- 30 g / 11 ms
Mechanical data - Connection technique
- Termination
- Cable
- Length of cable
- 1 m
- Wire cross-section
- 0.25 mm
- Wire cross-section
- 23 AWG
- Material of the Cable mantle
- LiYY
Mechanical data - Switching distances according EN IEC 60947-5-3
- Switching distance S
- 5 mm … 50 mm | BP 10 = 5 mm | 2 x BP 10 = 17 mm | BP 15 = 6 mm | 2 x BP 15 = 17 mm | 2 x BP 15/2 = 17 mm | BP 34 = 15 ... 20 mm | BP 20 = 20 mm | BP 31 = 20 mm | BP 11 = 20 mm | BP 12 = 10 ... 30 mm | BP 21 = 25 ... 50 mm
- Note (Switching distance Sn)
- Actuating distance up to 50 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.
Mechanical data
- Actuating panels
- lateral
- Actuating element
- Magnet
- Mechanical life, minimum
- 10,000,000 Operations
- Repeat accuracy R
- 0.3 mm
- Actuating speed, maximum
- 18 m/s
- Mounting
- central with threated flange M12 x 1
Accessory
- Recommendation (actuator)
- BP 10 | 2x BP 10 | BP 15 | 2x BP 15 | 2x BP 15/2 | BP 34 | BP 20 | BP 31 | BP 11 | BP 12 | BP 21
- Recommendation (actuator, lift switchgear)
- BP 10 | 2 x BP 15/2 | 2 x BP 15 | 2 x BP 10 | BP 15 | BP 34
Related products
Other Categories
NanometersManometersFlowmetersSensorsAcceleration SensorsFiber Optic SensorsDetectorsUltrasonic SensorsTemperature & Humidity SensorsVibration SensorsLevel SensorsPressure SensorsProximity SensorsInductive SensorsMotion SensorsMagnetic Sensors GroupOptical SensorsCapacitive SensorsPhotoelectric SensorsPosition SensorsEncodersOther sensors and Accessories