Schmersal
101117211
TV10S 355-11Z
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Product Conditions:
Mechanical data - connector side B
- Connector typ
- Female connector
Electrical data
- Thermal test current
- 10 A
- Utilisation category AC-15
- 230 VAC
- Utilisation category AC-15
- 4 A
- Utilisation category DC-13
- 24 VDC
- Utilisation category DC-13
- 4 A
- Switching element
- NO contact, NC contact
- Switching principle
- Slow action
- Switching frequency
- 1,000 /h
- Material of the contacts, electrical
- Silver
Note
- Note (General)
- By turning the head in 90° steps, 8 actuating planes are possible. A Torx T10 screwdriver is required for this purpose. Even when the screw is removed, the head is self-retaining. The switch can still not be tampered. | Adjustment tool: locking screw to fix, shaft pre-drilled to pin | Universal joint available to compensate for axial displacement (only for shaft bore 10 mm)
Mechanical data - Dimensions
- Length of sensor
- 65.3 mm
- Width of sensor
- 66.7 mm
- Height of sensor
- 107 mm
Ambient conditions - Insulation values
- Rated insulation voltage U
- 500 V
- Rated impulse withstand voltage U
- 6 kV
Safety classification - Safety outputs
- B
- 20,000,000 Operations
General data - Features
- Number of auxiliary contacts
- 1
- Number of safety contacts
- 1
General data
- Enclosure material
- Light alloy die-casting
- Enclosure coating material
- painted
- Gross weight
- 310 g
Safety classification
- Standards
- BG-GS-ET-15 | EN ISO 13849-1 | EN IEC 60947-5-1
- Mission time
- 20 Year(s)
Ambient conditions
- Degree of protection
- IP67
- Ambient temperature
- -25 ... +70 °C
Mechanical data - Connection technique
- Termination
- Screw terminals M20 x 1.5
- Cable section, minimum
- 0.75 mm²
- Cable section, maximum
- 2.5 mm²
- Note (Cable section)
- All indications including the conductor ferrules.
Mechanical data
- Actuating element
- Other
- Mechanical life, minimum
- 1,000,000 Operations
- Positive break angle
- 7 °
- Mounting hole for the Shaft
- 10 mm
- Positive break torque
- 0.6 Nm
Approvals - Standards
- Certificates
- cULus | CCC
Other Categories
NanometersManometersFlowmetersSensorsAcceleration SensorsFiber Optic SensorsDetectorsUltrasonic SensorsTemperature & Humidity SensorsVibration SensorsLevel SensorsPressure SensorsProximity SensorsInductive SensorsMotion SensorsMagnetic Sensors GroupOptical SensorsCapacitive SensorsPhotoelectric SensorsPosition SensorsEncodersOther sensors and Accessories