Schmersal
101125144
BNS 303-11Z 4,0M
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Electrical data
- Switching voltage, maximum
- 100 VAC
- Switching voltage, maximum
- 100 VDC
- Switching current, maximum
- 0.4 A
- Switching capacity, maximum
- 10 W
- Switching frequency, maximum
- 5 Hz
Note
- Note (General)
- Contact symbols shown for the closed condition of the guard device. | The contact configuration for versions with or without LED is identical.
Mechanical data - Dimensions
- ISO thread of the sensor
- M30
- Width across flats
- 36 BK
- Length of sensor
- 44 mm
Scope of delivery
- Scope of delivery
- Actuator must be ordered separately.
- Scope of delivery of mounting material
- 2x Mounting material M30 x 1.5 nuts
Safety classification - Safety outputs
- B
- 25,000,000 Operations
Electrical data - Digital Output
- Design of control elements
- Miscellaneous, Reed contacts
General data - Features
- Number of normally closed (NC)
- 1
- Number of normally open (NO)
- 1
- Number of safety contacts
- 2
- Number of cable wires
- 4
General data
- Standards
- BG-GS-ET-14 | EN IEC 60947-5-3
- Coding level according to EN ISO 14119
- Low
- Working principle
- Magnetic drive
- Installation conditions (mechanical)
- quasi-flush
- Enclosure material
- Glass-fibre, reinforced thermoplastic
- Material of the nuts
- Thermoplastic
- Gross weight
- 195 g
Safety classification
- Standards
- EN ISO 13849-1
- Mission time
- 20 Year(s)
Ambient conditions
- Degree of protection
- IP67
- Ambient temperature
- -25 ... +70 °C
- Storage and transport temperature, minimum
- -25 °C
- Storage and transport temperature, maximum
- +70 °C
- Resistance to vibrations
- 10 … 55 Hz, amplitude 1 mm
- Restistance to shock
- 30 g / 11 ms
Mechanical data - Connection technique
- Termination
- Cable
- Length of cable
- 4 m
- Wire cross-section
- 0.25 mm
- Wire cross-section
- 23 AWG
- Material of the Cable mantle
- PVC
Mechanical data - Switching distances according EN IEC 60947-5-3
- Assured switching distance "ON" S
- 5 mm
- Assured switching distance "OFF" S
- 15 mm
Mechanical data
- Actuating element
- Magnet
- Direction of motion
- Head-on to the active surface
- Tightening torque of nuts, maximum
- 3 Nm
Accessory
- Recommendation (actuator)
- BPS 300 | BPS 303 | BPS 303 SS
- Recommended safety switchgear
- SRB 301AN | SRB-E-301ST | SRB-E-201LC
Approvals - Standards
- Certificates
- TÜV | BG | cULus
Other Categories
NanometersManometersFlowmetersSensorsAcceleration SensorsFiber Optic SensorsDetectorsUltrasonic SensorsTemperature & Humidity SensorsVibration SensorsLevel SensorsPressure SensorsProximity SensorsInductive SensorsMotion SensorsMagnetic Sensors GroupOptical SensorsCapacitive SensorsPhotoelectric SensorsPosition SensorsEncodersOther sensors and Accessories