101136311

Electrical data

Thermal test current

10 A

Required rated short-circuit current

1,000 A

Switching element

Opener (NC)

Switching principle

slow action, positive break NC contact

Switching frequency

2,000 /h

Material of the contacts, electrical

Silver

Note

Note (General)

This type termination (IDC) method enables simple connetion of flexible conductors without the need for the use of conductor ferrules | The actuator is not available separately.

Mechanical data - Dimensions

Length of sensor

30 mm

Width of sensor

30 mm

Height of sensor

85 mm

Ambient conditions - Insulation values

Rated insulation voltage U

250 VAC

Rated impulse withstand voltage U

4 kV

Overvoltage category

III

Degree of pollution

3

Scope of delivery

Scope of delivery

Not available as spare part | Slot cover for dust-proof covering of the opening not in use

Safety classification - Safety outputs

B

2,000,000 Operations

General data - Features

Increased latching force

Yes

Number of actuating directions

2

Number of cable glands

1

Number of safety contacts

2

General data

Standards

EN ISO 13849-1 | EN ISO 14119 | EN IEC 60947-5-1

Coding level according to EN ISO 14119

High

Working principle

electromechanical

Enclosure material

Plastic, glass-fibre reinforced thermoplastic, self-extinguishing

Material of the actuator

Stainless steel

Gross weight

120 g

Safety classification

Standards

EN IEC 60947-5-1

Mission time

20 Year(s)

Ambient conditions

Degree of protection

IP67

Ambient temperature

-30 ... +80 °C

Storage and transport temperature, minimum

-30 °C

Storage and transport temperature, maximum

+85 °C

Permissible installation altitude above sea level, maximum

2,000 m

Mechanical data - Connection technique

Termination

IDC method of termination

Cable section, minimum

0.75 mm²

Cable section, maximum

1 mm²

Note (Cable section)

All indications including the conductor ferrules.

Allowed type of cable

flexible

Mechanical data

Mechanical life, minimum

1,000,000 Operations

Latching force

30 N

Positive break travel

11 mm

Positive break force per NC contact, minimum

17 N

Positive break force, minimum

34 N

Actuating speed, maximum

2 m/s

Mounting

Screws

Type of the fixing screws

2x M5

Tightening torque of the fastening screws for the housing cover, minimum

0.7 Nm

Tightening torque of the fastening screws for the housing cover, maximum

1 Nm

Note

Torx T10

CAD Models

Trace parts

Download