Schmersal
101184378
BNS 260-02/01Z-ST-L
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Product Conditions:
Electrical data
- Required rated short-circuit current
- 100 A
- Switching voltage, maximum
- 30 VDC
- Switching current, maximum
- 0.4 A
- Switching capacity, maximum
- 10 VA
- Switching frequency, maximum
- 5 Hz
Note
- Note (General)
- The number in brackets indicate the PIN number of the connector.
Mechanical data - Dimensions
- Length of sensor
- 13 mm
- Width of sensor
- 26 mm
- Height of sensor
- 36 mm
Ambient conditions - Insulation values
- Rated insulation voltage U
- 50 VAC
- Rated impulse withstand voltage U
- 0.8 kV
Scope of delivery
- Scope of delivery
- Actuator must be ordered separately.
Safety classification - Safety outputs
- B
- 25,000,000 Operations
General data - Features
- Number of normally closed (NC)
- 3
- Number of safety contacts
- 2
General data
- Standards
- BG-GS-ET-14 | EN IEC 60947-5-3
- Coding level according to EN ISO 14119
- Low
- Working principle
- Magnetic drive
- Installation conditions (mechanical)
- quasi-flush
- Enclosure material
- Glass-fibre, reinforced thermoplastic
- Gross weight
- 31 g
Safety classification
- Standards
- EN ISO 13849-1
- Mission time
- 20 Year(s)
Wiring example
- Note (Wiring diagram)
- The contacts S11-S12 and S21-S22 must be integrated in the safety circuit.
Ambient conditions
- Degree of protection
- IP67
- Ambient temperature
- -25 ... +70 °C
- Storage and transport temperature, minimum
- -25 °C
- Storage and transport temperature, maximum
- +70 °C
- Resistance to vibrations
- 10 … 55 Hz, amplitude 1 mm
- Restistance to shock
- 30 g / 11 ms
Mechanical data - Connection technique
- Termination
- Connector 8 mm, 6-pole, Latching interlocking
Mechanical data - Switching distances according EN IEC 60947-5-3
- Note (Switching distance Sn)
- Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range.
- Assured switching distance "ON" S
- 5 mm
- Assured switching distance "OFF" S
- 15 mm
Mechanical data
- Actuating element
- Magnet
- Door hinge
- Left
- Direction of motion
- Head-on to the active surface
Accessory
- Recommendation (actuator)
- BPS 260
- Recommended safety switchgear
- SRB-E-301ST | SRB-E-201LC
Approvals - Standards
- Certificates
- TÜV | BG | cULus
CAD Models
Trace parts
DownloadOther Categories
NanometersManometersFlowmetersSensorsAcceleration SensorsFiber Optic SensorsDetectorsUltrasonic SensorsTemperature & Humidity SensorsVibration SensorsLevel SensorsPressure SensorsProximity SensorsInductive SensorsMotion SensorsMagnetic Sensors GroupOptical SensorsCapacitive SensorsPhotoelectric SensorsPosition SensorsEncodersOther sensors and Accessories