101187273

BN 650-10Z

101187273

101187273

101187273

101187273

101187273

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

1

Payment methods:

Request a Quote and we will send you information on availability and price.

Electrical data

Switching voltage, maximum: 200 VAC
Switching voltage, maximum: 200 VDC
Switching current, maximum: 1 A
Switching capacity, maximum: 30 W
Switching capacity, maximum: 30 VA
Switching element: Normally open contact (NO)
Bounce duration, minimum: 0.3 ms
Bounce duration, maximum: 0.2 ms
Switching frequency, maximum: 300 Hz
Switching frequency: 1,080,000 /h

Mechanical data - Dimensions

Diameter of sensor: 13 mm
Width across flats: 22 BK
Length of sensor: 103 mm

Scope of delivery

Scope of delivery: Actuator must be ordered separately.

Electrical data - Digital Output

Design of control elements: Reed contacts

General data - Features

Suitable for elevators: Yes
Bias magnet: Yes
Number of normally open (NO): 1

General data

Working principle: Magnetic drive
Housing construction form: Cylinder smooth
Enclosure material: Glass-fibre, reinforced thermoplastic
Gross weight: 65 g

Ambient conditions

Degree of protection: IP67
Ambient temperature: -25 ... +75 °C
Resistance to vibrations: 10 … 55 Hz, amplitude 1 mm
Restistance to shock: 30 g, on sine wave oscillation
Resistant to vibration: 30 g, on sine wave oscillation

Mechanical data - Connection technique

Termination: Cable
Length of cable: 1 m
Wire cross-section: 0.25 mm
Wire cross-section: 23 AWG
Material of the Cable mantle: H03VV-F

Mechanical data - Switching distances according EN IEC 60947-5-3

Switching distance S: 5 mm … 50 mm | BP 10 = 5 mm | 2 x BP 10 = 17 mm | BP 15 = 6 mm | 2 x BP 15 = 17 mm | 2 x BP 15/2 = 17 mm | BP 34 = 15 ... 20 mm | BP 20 = 20 mm | BP 31 = 20 mm | BP 11 = 20 mm | BP 12 = 10 ... 30 mm | BP 21 = 25 ... 50 mm
Note (Switching distance Sn): Actuating distance up to 50 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.

Mechanical data

Actuating panels: lateral
Actuating element: Magnet
Mechanical life, minimum: 1,000,000,000 Operations
Repeat accuracy R: 0.3 mm
Actuating speed, maximum: 18 m/s
Mounting: central with threated flange
Tightening torque of nuts, maximum: 3 Nm

Accessory

Recommendation (actuator): BP 10 | 2x BP 10 | BP 15 | 2x BP 15 | 2x BP 15/2 | BP 34 | BP 20 | BP 31 | BP 11 | BP 12 | BP 21
Recommendation (actuator, lift switchgear): BP 10 | 2 x BP 15/2 | 2 x BP 15 | 2 x BP 10 | BP 15 | BP 34