101191958

BNS 260-02/01ZG-R 5,0M

101191958

101191958

101191958

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

1

Payment methods:

Product Conditions:

New Sealed

Availability:: 0 pcs.
On Request
Supplier Warranty:: 12 months

Send request for price

Updated at 30.05.2024

Electrical data

Required rated short-circuit current: 100 A
Switching current, maximum: 0.01 A
Switching capacity, maximum: 0.2 W
Switching frequency, maximum: 5 Hz

Note

Note (General): Contact symbols shown for the closed condition of the guard device. | The contact configuration for versions with or without LED is identical.

Mechanical data - Dimensions

Length of sensor: 13 mm
Width of sensor: 26 mm
Height of sensor: 36 mm

Ambient conditions - Insulation values

Rated insulation voltage U: 75 VDC
Rated impulse withstand voltage U: 0.8 kV

Scope of delivery

Scope of delivery: Actuator must be ordered separately.

Safety classification - Safety outputs

B: 25,000,000 Operations

General data - Features

Integral system diagnostics, status: Yes
Number of normally closed (NC): 3
Number of safety contacts: 2
Number of cable wires: 6

General data

Standards: BG-GS-ET-14 | EN IEC 60947-5-3
Coding level according to EN ISO 14119: Low
Working principle: Magnetic drive
Installation conditions (mechanical): quasi-flush
Enclosure material: Glass-fibre, reinforced thermoplastic
Gross weight: 218 g

Safety classification

Standards: EN ISO 13849-1
Mission time: 20 Year(s)

Wiring example

Note (Wiring diagram): The contacts S11-S12 and S21-S22 must be integrated in the safety circuit.

Ambient conditions

Degree of protection: IP67
Ambient temperature: -25 ... +70 °C
Storage and transport temperature, minimum: -25 °C
Storage and transport temperature, maximum: +70 °C
Resistance to vibrations: 10 … 55 Hz, amplitude 1 mm
Restistance to shock: 30 g / 11 ms

Mechanical data - Connection technique

Termination: Cable
Length of cable: 5 m
Wire cross-section: 0.25 mm
Material of the Cable mantle: PVC

Mechanical data - Switching distances according EN IEC 60947-5-3

Note (Switching distance Sn): Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range.
Assured switching distance "ON" S: 5 mm
Assured switching distance "OFF" S: 15 mm

Mechanical data

Actuating element: Magnet
Door hinge: Right
Direction of motion: Head-on to the active surface

Accessory

Recommendation (actuator): BPS 260
Recommended safety switchgear: SRB-E-301ST | SRB-E-201LC

Approvals - Standards

Certificates: TÜV | BG | cULus

Status indication

Note (Integral System Diagnostics, status ): The LED is illuminated when the guard is closed.