Schmersal
101193281
AZM 200CC-T-SD2PA
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Electrical data - Safety digital inputs
- Switching thresholds
- −3 V … 5 V (Low) | 15 V … 30 V (High)
- Current consumption at 24 V
- 5 mA
Electrical data - Serial diagnostic SD
- Designation, Serial diagnostic SD
- OUT
- Operation current
- 150 mA
- Design of control elements
- short-circuit proof, p-type
- Wiring capacitance
- 50 nF
Electrical data
- Operating voltage
- 24 VDC -15 % / +10 %
- No-load supply current I
- 600 mA
- Rated operating voltage
- 24 VDC
- Operating current
- 1,200 mA
- Time to readiness, maximum
- 4,000 ms
- Switching frequency, approx.
- 1 Hz
Note
- Note (General)
- As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened.
Mechanical data - Dimensions
- Length of sensor
- 50 mm
- Width of sensor
- 40 mm
- Height of sensor
- 220 mm
Ambient conditions - Insulation values
- Rated insulation voltage U
- 32 VDC
- Rated impulse withstand voltage U
- 0.8 kV
- Overvoltage category
- III
- Degree of pollution
- 3
Scope of delivery
- Scope of delivery
- Actuator must be ordered separately. | Triangular key for AZM 200
Electrical data - Magnet control
- Switching thresholds
- -3 V … 5 V (Low) | 15 V … 30 V (High)
- Magnet switch-on time
- 100 %
General data - Features
- Power to lock
- Yes
- Solenoid interlock monitored
- Yes
- Serial diagnostics
- Yes
- Manual release
- Yes
- Short circuit detection
- Yes
- Cross-circuit detection
- Yes
- Series-wiring
- Yes
- Safety functions
- Yes
- Integral system diagnostics, status
- Yes
- Number of safety contacts
- 2
- Number of series-wiring of sensors
- 31
General data
- Standards
- EN ISO 13849-1 | EN IEC 60947-5-1 | EN IEC 61508
- Working principle
- inductive
- Enclosure material
- Glass-fibre, reinforced thermoplastic
- Reaction time, maximum
- 60 ms
- Duration of risk, maximum
- 120 ms
Safety classification
- Standards
- EN IEC 60947-5-3 | EN IEC 61508
- Mission time
- 20 Year(s)
Electrical data - Safety digital outputs
- Rated operating current (safety outputs)
- 250 mA
- Voltage drop U
- 4 V
- Leakage current I
- 0.5 mA
- Voltage, Utilisation category DC-13
- 24 VDC
- Current, Utilisation category DC-13
- 0.25 A
Safety classification - Interlocking function
- Performance Level, up to
- e
- Category
- 4
- Safety Integrity Level (SIL), suitable for applications in
- 3
Ambient conditions
- Degree of protection
- IP67
- Ambient temperature
- -25 ... +50 °C
- Storage and transport temperature, minimum
- -25 °C
- Storage and transport temperature, maximum
- +85 °C
- Relative humidity, minimum
- 30 %
- Relative humidity, maximum
- 95 %
- Note (Relative humidity)
- non-condensing
- Resistance to vibrations
- 10 … 55 Hz, amplitude 1 mm
- Restistance to shock
- 30 g / 11 ms
- Protection class
- II
Mechanical data - Connection technique
- Termination
- Spring pulley connection
- Note (series-wiring)
- Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
- Cable section, minimum
- 0.25 mm²
- Cable section, maximum
- 1.5 mm²
- Note (Cable section)
- All indications including the conductor ferrules.
- Wire cross-section, minimum
- 23 AWG
- Wire cross-section, maximum
- 15 AWG
- Wire cross-section
- 23 ... 15 AWG
- Allowed type of cable
- solid single-wire | solid multi-wire | flexible
Mechanical data
- Mechanical life, minimum
- 1,000,000 Operations
- Holding force F
- 2,000 N
- Note (clamping force F
- 1,000 N when used with the AZ/AZM201-B30 actuator, for indoor use.
- Holding force F
- 2,600 N
- Note (clamping force F
- 1,300 N when used with the AZ/AZM201-B30 actuator, for indoor use.
- Latching force
- 30 N
- Actuating speed, maximum
- 0.2 m/s
- Tightening torque of the fastening screws for the housing cover, minimum
- 0.7 Nm
- Tightening torque of the fastening screws for the housing cover, maximum
- 1 Nm
- Note
- Torx T10
Accessory
- Recommendation (actuator)
- AZ/AZM 200-B1
Approvals - Standards
- Certificates
- TÜV | cULus
Status indication
- Note (LED switching conditions display)
- Operating condition: LED green | Error / functional defect: LED red | Supply voltage UB: LED green
Other Categories
NanometersManometersFlowmetersSensorsAcceleration SensorsFiber Optic SensorsDetectorsUltrasonic SensorsTemperature & Humidity SensorsVibration SensorsLevel SensorsPressure SensorsProximity SensorsInductive SensorsMotion SensorsMagnetic Sensors GroupOptical SensorsCapacitive SensorsPhotoelectric SensorsPosition SensorsEncodersOther sensors and Accessories