Schmersal
101194059
BNS-Y-11
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Product Conditions:
Note
- Note (General)
- Any conventional 4-pole cable with M8 connector can be used as connecting cable. | The sensor chain is extended by connecting further Y-adapters in the direction of the arrow. The last safety sensor is connected to the female connector on the extension as the termination. | Only safety sensors with the same contact configuration can be connected in series. The types BNS-Y-11 and BNS-Y-02 are not allowed to be connected together in a mixed configuration. | The maximum length of the series wiring is 50 m. | The adapter BNS-Y-11 is intended for safety sensors BNS with normally closed and normally open contacts. With the BNS-Y-11, a series-parallel circuit is set up where the normally closed contacts on the safety sensors are connected in series and the normally open contacts are connected in parallel.
Mechanical data - Dimensions
- Width
- 23.5 mm
- Height
- 31 mm
- Diameter of the ISO-thread
- M8
General data
- Versions
- Y-adapter
- Connector (electric)
- 2 x Female connector, 4-pole | 1 x Male connector, 4-pole
- Gross weight
- 22 g
Ambient conditions
- Degree of protection
- IP67
- Ambient temperature
- -25 ... +70 °C
Mechanical data
- Mechanical life, minimum
- 100 Cycles
Accessory
- Recommendation (product combination)
- BNS 33 | BNS 36 | BNS 260
Specifications
- Length
- 10 mm
- Width
- 23.5 mm
- Height
- 31 mm
Related products
Other Categories
NanometersManometersFlowmetersSensorsAcceleration SensorsFiber Optic SensorsDetectorsUltrasonic SensorsTemperature & Humidity SensorsVibration SensorsLevel SensorsPressure SensorsProximity SensorsInductive SensorsMotion SensorsMagnetic Sensors GroupOptical SensorsCapacitive SensorsPhotoelectric SensorsPosition SensorsEncodersOther sensors and Accessories