101194954

BNS 36 AS-R

101194954

101194954

101194954

101194954

101194954

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

1

Payment methods:

Product Conditions:

New Sealed

Availability:: 0 pcs.
On Request
Supplier Warranty:: 12 months

Send request for price

Updated at 29.05.2024

Electrical data - AS-Interface specification

AS-i Specification: Safety-Slave
AS-i Version: V 2.1
AS-i Profile: S-0.B.F.E
AS-i, IO-Code: 0x0
AS-i, ID-Code: 0xB
AS-i, ID-Code1: 0xF
AS-i, ID-Code2: 0xE
AS-i Input, Channel 1: Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2: Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Outputs, DO 0 … DO 3: No Function
AS-i Parameter bits, P0 ... P3: No function
Note (AS-i Parameter bits): Set the parameter outputs to "1111" (0xF)
AS-i Input module address: 0
Note (AS-i Input module address): Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

Mechanical data - Dimensions

Length of sensor: 13 mm
Height of sensor: 25 mm

Pin assignment

PIN 1: Brown (AS interface +)
PIN 2: n.c.
PIN 3: Blue (AS interface −)
PIN 4: n.c.

Ambient conditions - Insulation values

Rated insulation voltage U: 32 VDC
Rated impulse withstand voltage U: 0.8 kV
Overvoltage category: III
Degree of pollution: 3

Scope of delivery

Scope of delivery: Actuator must be ordered separately.

General data - Features

Coding: Yes
Integral system diagnostics, status: Yes

General data

Standards: EN IEC 62026-2 | EN ISO 13849-1 | EN IEC 60947-5-3 | EN IEC 61508
Working principle: Magnetic drive
Installation conditions (mechanical): quasi-flush
Enclosure material: Glass-fibre, reinforced thermoplastic
Gross weight: 95 g
Reaction time, maximum: 100 ms

Safety classification

Standards: EN IEC 61508
Performance Level, up to: e
Category: 4
PFH value: 1.24 x 10⁻⁸ /h
Note (PFH-value): up to max. 500,000 switching cycles/year
Safety Integrity Level (SIL), suitable for applications in: 3
Mission time: 20 Year(s)

Electrical data - AS Interface

Rated operating voltage: 18 ... 31.6 VDC (Protection against polarity reversal)
AS-i Current consumption, maximum: 50 mA

Ambient conditions

Degree of protection: IP67
Ambient temperature: -25 ... +60 °C
Storage and transport temperature, minimum: -25 °C
Storage and transport temperature, maximum: +70 °C
Resistance to vibrations: 10 … 55 Hz, amplitude 1 mm
Restistance to shock: 30 g / 11 ms

Mechanical data - Connection technique

Termination: Connecting cable, 2 pole
Length of cable: 2 m
Wire cross-section: 0.23 mm
Wire cross-section: 23 AWG
Material of the Cable mantle: LSYY

Mechanical data - Switching distances according EN IEC 60947-5-3

Note (Switching distance Sn): Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range.
Assured switching distance "ON" S: 7 mm
Assured switching distance "OFF" S: 17 mm

Mechanical data

Actuating element: Magnet
Door hinge: Right
Note (Repeat accuracy R): Wiederholgenauigkeit R ≤ 0,1 x S
Direction of motion: Head-on to the active surface

Accessory

Recommendation (actuator): BPS 36-2

Approvals - Standards

Certificates: TÜV | cULus | ASi-SaW

Status indication

Note (LED switching conditions display): (1) LED green-red (AS-i Duo LED): Supply voltage / Communication error / Slave address = 0 | (2) LED yellow: Enabling status