101209612

BN 310-2RZ-2486

101209612

101209612

101209612

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

1

Payment methods:

Product Conditions:

New Sealed

Availability:: 0 pcs.
On Request
Supplier Warranty:: 12 months

Send request for price

Updated at 28.05.2024

Electrical data

Switching current, maximum: 3 A
Switching capacity, maximum: 30 W
Switching capacity, maximum: 30 VA

Note

Note (General): The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. | When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). This does not apply to the bistable contact. | The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm.

Mechanical data - Dimensions

Length of sensor: 13 mm
Width of sensor: 88 mm
Height of sensor: 25 mm

Scope of delivery

Scope of delivery: Actuator must be ordered separately.

Electrical data - Digital Output

Design of control elements: Reed contacts

General data - Features

Latching: Yes
Suitable for elevators: No
Number of snap-in contacts: 2

General data

Working principle: Magnetic drive
Housing construction form: rectangular
Enclosure material: Glass-fibre, reinforced thermoplastic
Gross weight: 73 g

Ambient conditions

Degree of protection: IP67
Ambient temperature: -25 ... +75 °C
Resistance to vibrations: 10 … 55 Hz, amplitude 1 mm
Restistance to shock: 30 g / 11 ms

Mechanical data - Connection technique

Termination: Connector M12, 4-pole
Wire cross-section: 0.75 mm
Wire cross-section: 18 AWG
Material of the Cable mantle: H03VV-F

Mechanical data - Switching distances according EN IEC 60947-5-3

Note (Switching distance Sn): Actuating distance up to 60 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.

Mechanical data

Actuating element: Magnet
Mechanical life, minimum: 1,000,000,000 Operations
Repeat accuracy R: 0.3 mm
Actuating speed, maximum: 18 m/s
Mounting: Enclosure with mounting slots

Accessory

Recommendation (actuator): BP 10 S | 2x BP 10 S | BP 15 S | BP 34 S | BP 20 S | BP 31 S | BP 11 S | 2x BP 11 S | BP 12 S | BP 21 S | 2x BP 21 S | BP 10 N | 2x BP 10 N | BP 15 N | 2 x BP 15/2 N | 2x BP 15/2 S | BP 34 N | BP 20 N | BP 31 N | BP 11 N