101210928

AZM 170 B ST-AS P

101210928

101210928

101210928

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

1

Payment methods:

Request a Quote and we will send you information on availability and price.

Electrical data - AS-Interface specification

AS-i Specification: Safety-Slave
AS-i Version: V 2.1
AS-i Profile: S-7.B.F.E
AS-i, IO-Code: 0x7
AS-i, ID-Code: 0xB
AS-i, ID-Code1: 0xF
AS-i, ID-Code2: 0xE
AS-i Input, Channel 1: Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2: Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Outputs, DO 0: Solenoid control
AS-i Outputs, DO 1: No Function
AS-i Outputs, DO 2: No Function
AS-i Outputs, DO 3: No Function
AS-i Parameter bits, P0: Safety guard and actuator detected
AS-i Parameter bits, P1: Solenoid interlock locked
AS-i Parameter bits, P2: No function
AS-i Parameter bits, P3: No function
Note (AS-i Parameter bits): Set the parameter outputs to "1111" (0xF) | FID: periphery error
AS-i Input module address: 0
Note (AS-i Input module address): Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

Note

Note (General): Interlocks with the power to lock principle may only be used in special cases after a thorough evaluation of the accident risk, since the guarding device can immediately be opened on failure of the electrical power supply or when the main switch is opened.

Mechanical data - Dimensions

Width of sensor: 90 mm
Height of sensor: 75.5 mm

Pin assignment

PIN 1: AS-i +
PIN 2: Aux - (P)
PIN 3: AS-Interface -
PIN 4: Aux + (P)

Ambient conditions - Insulation values

Rated insulation voltage U: 32 VDC
Rated impulse withstand voltage U: 0.8 kV
Overvoltage category: III
Degree of pollution: 3

Scope of delivery

Scope of delivery: Actuator must be ordered separately.

General data - Features

Power to unlock: Yes
Actuator monitored: Yes
Integral system diagnostics, status: Yes
Number of actuating directions: 2

General data

Standards: EN IEC 62026-2 | EN ISO 13849-1 | EN IEC 60947-5-1 | EN IEC 61508
Working principle: electromechanical
Enclosure material: Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Gross weight: 300 g
Reaction time, maximum: 100 ms

Safety classification

Standards: EN IEC 61508
Performance Level, up to: c
Category: 1
PFH value: 1.16 x 10⁻⁶ /h
Note (PFH-value): up to max. 100,000 switching cycles/year
Safety Integrity Level (SIL), suitable for applications in: 1
Mission time: 20 Year(s)
Please note:: Einsetzbar wenn ein Fehlerausschluss für eine gefahrbringende Beschädigung der 1-kanaligen Mechanik zulässig ist und ein ausreichender Manipulationsschutz gewährleistet ist.
Performance Level, up to: d
Category: 3
PFH value: 1.01 x 10⁻⁷ /h
Safety Integrity Level (SIL), suitable for applications in: 2

Electrical data - AS Interface

Rated operating voltage: 26.5 ... 31.6 VDC (Protection against polarity reversal)
AS-i Current consumption, maximum: 100 mA

Ambient conditions

Degree of protection: IP67
Ambient temperature: -25 ... +55 °C
Storage and transport temperature, minimum: -25 °C
Storage and transport temperature, maximum: +85 °C
Relative humidity, minimum: 30 %
Relative humidity, maximum: 95 %
Note (Relative humidity): non-condensing | non-icing
Protection class: II

Mechanical data - Connection technique

Termination: Connector plug M12, 4-pole, (A-coding)

Mechanical data

Mechanical life, minimum: 1,000,000 Operations
Holding force: 1,000 N
Latching force: 5 N
Actuating speed, maximum: 2 m/s

Approvals - Standards

Certificates: TÜV | cULus | ASi-SaW

Electrical data - Auxiliary voltage

Operating voltage: 24 VDC -15 % / +10 % (stabilised PELV power supply)
Current consumption: 500 mA
Rated operating voltage: 24 VDC

Status indication

Note (LED switching conditions display): (1) LED green: Supply voltage | (2) red LED: Communication error / Slave address = 0 | (3) LED yellow : Enabling status