103000234

Electrical data

Thermal test current

6 A

Rated control voltage

24 VAC/DC

Required rated short-circuit current

1,000 A

Electrical power consumption, maximum

10 W

Switching element

NO contact, NC contact

Switching principle

slow action, positive break NC contact

Switching frequency

1,000 /h

Material of the contacts, electrical

Silver

Note

Note (General)

The axis of the hinge must be 5 mm above and in a parallel plane to the top surface of the safety switch. | minimum actuating radius on hinged guards in line with the plane of the actuator 150 mm | minimum actuating radius on rotating guard systems via the narrow edge of the actuator 180 mm | The actuator is not available separately.

Note (Emergency exit)

The emergency exit is used where an intervention in an already locked hazardous area is required | Emergency exit by pressing the red push button

Note (Manual release)

For maintenance, installation, etc. | For manual release using M5 triangular key, available as accessory | Top-side (ordering suffix -ED) or rear-side (ordering suffix -EU) mounting possible

Mechanical data - Dimensions

Length of sensor

30 mm

Width of sensor

130 mm

Height of sensor

90 mm

Ambient conditions - Insulation values

Rated insulation voltage U

250 VAC

Rated impulse withstand voltage U

4 kV

Electrical data - Safety contacts

Voltage, Utilisation category AC-15

230 VAC

Current, Utilisation category AC-15

4 A

Voltage, Utilisation category DC-13

24 VDC

Current, Utilisation category DC-13

2.5 A

Scope of delivery

Scope of delivery

Not available as spare part | Slot sealing plugs | The actuator is included in the scope of delivery

Safety classification - Safety outputs

B

2,000,000 Operations

B

1,000,000 Operations

Note (B

at 10% I | and ohmic load

Electrical data - Magnet control

Magnet switch-on time

100 %

Test pulse duration, maximum

5 ms

Test pulse interval, minimum

50 ms

General data - Features

Power to unlock

Yes

Emergency exit

Yes

Manual release

Yes

Number of actuating directions

3

Number of auxiliary contacts

2

Number of safety contacts

4

General data

Standards

EN ISO 13849-1 | EN ISO 14119 | EN IEC 60947-5-1

Coding

Individual coding

Coding level according to EN ISO 14119

High

Working principle

electromechanical

Enclosure material

Glass-fibre, reinforced thermoplastic

Material of the actuator

Stainless steel

Gross weight

515 g

Electrical data - Auxiliary contacts

Voltage, Utilisation category AC-15

230 VAC

Current, Utilisation category AC-15

4 A

Voltage, Utilisation category DC-13

24 VDC

Current, Utilisation category DC-13

2.5 A

Safety classification

Standards

EN ISO 13849-1

Mission time

20 Year(s)

Other data

Note (applications)

sliding safety guard | removable guard | hinged safety guard

Ambient conditions

Degree of protection

IP67

Ambient temperature

-30 ... +60 °C

Storage and transport temperature, minimum

-25 °C

Storage and transport temperature, maximum

+85 °C

Permissible installation altitude above sea level, maximum

2,000 m

Mechanical data - Connection technique

Termination

Screw terminals

Cable entry

4 x M16 x 1,5

Cable section, minimum

0.25 mm²

Cable section, maximum

1.5 mm²

Note (Cable section)

All indications including the conductor ferrules.

Allowed type of cable

solid single-wire | solid multi-wire | flexible

Mechanical data

Actuating radius, minimum

150 mm

Mechanical life, minimum

1,000,000 Operations

Actuating play in direction of actuation

5.5 mm

Holding force F

2,000 N

Holding force F

2,600 N

Latching force

30 N

Positive break travel

10 mm

Positive break force per NC contact, minimum

10 N

Positive break force, minimum

20 N

Actuating speed, maximum

2 m/s

Type of the fixing screws

3x M6

Approvals - Standards

Certificates

cULus | CCC

CAD Models

Trace parts

Download