103004640

RSS260-I1-ST-AS

103004640

103004640

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

1

Payment methods:

Product Conditions:

New Sealed

Availability:: 0 pcs.
On Request
Supplier Warranty:: 12 months

Send request for price

Updated at 14.05.2024

Electrical data

Time to readiness, maximum: 2,000 ms
Switching frequency, maximum: 1 Hz

Electrical data - AS-Interface specification

AS-i Specification: Safety-Slave
AS-i Version: V 2.1
AS-i Profile: S-0.B.F.E
AS-i, IO-Code: 0x0
AS-i, ID-Code: 0xB
AS-i, ID-Code1: 0xF
AS-i, ID-Code2: 0xE
AS-i Input, Channel 1: Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2: Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Outputs, DO 0 … DO 3: No Function
AS-i Parameter bits, P0: Actuator in
AS-i Parameter bits, P1: Enabling inhibit (tamper protection time) active (FID))
AS-i Parameter bits, P2: No function
AS-i Parameter bits, P3: Internal device error (FID)
Note (AS-i Parameter bits): Set the parameter outputs to "1111" (0xF) | FID: periphery error
AS-i Input module address: 0
Note (AS-i Input module address): Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

Mechanical data - Dimensions

Length of sensor: 18 mm
Width of sensor: 40 mm
Height of sensor: 29.5 mm

Pin assignment

PIN 1: AS-Interface +
PIN 2: n.c. (≤ 30 VDC)
PIN 3: AS-Interface -
PIN 4: n.c. (≤ 30 VDC)

Ambient conditions - Insulation values

Rated insulation voltage U: 32 VDC
Rated impulse withstand voltage U: 0.8 kV
Overvoltage category: III
Degree of pollution: 3

Scope of delivery

Scope of delivery: Actuator must be ordered separately.
Note (scope of delivery, number and type): Actuator incl. mounting plate

General data - Features

Coding: Yes
Safety functions: Yes
Integral system diagnostics, status: Yes
Number of actuating directions: 2

General data

Standards: EN IEC 62026-2 | EN ISO 13849-1 | EN ISO 14119 | EN IEC 60947-5-3 | EN IEC 61508
Coding: Individual coding
Coding level according to EN ISO 14119: High
Working principle: RFID
Enclosure material: Thermoplastic hotmelt
Gross weight: 55 g
Reaction time, maximum: 100 ms
Duration of risk, maximum: 200 ms

Safety classification

Standards: EN IEC 61508
Performance Level, up to: e
Category: 4
PFH value: 3.93 x 10⁻¹⁰ /h
PFD value: 6.89 x 10⁻⁵
Safety Integrity Level (SIL), suitable for applications in: 3
Mission time: 20 Year(s)

Electrical data - AS Interface

Rated operating voltage: 18 ... 31.6 VDC (Protection against polarity reversal)
AS-i Current consumption, maximum: 100 mA

Ambient conditions

Degree of protection: IP65 | IP67
Ambient temperature: -25 ... +60 °C
Storage and transport temperature, minimum: -25 °C
Storage and transport temperature, maximum: +85 °C
Resistance to vibrations: 10 … 55 Hz, amplitude 1 mm
Restistance to shock: 30 g / 11 ms
Protection class: III

Mechanical data - Connection technique

Termination: Connector M8, 4-pole, A-coded

Mechanical data - Switching distances according EN IEC 60947-5-3

Switching distance S: 12 mm | 9 mm (in case of approach from side)
Assured switching distance "ON", frontal: 10 mm
Assured switching distance "OFF", frontal: 18 mm
Assured switching distance "ON", lateral: 6 mm
Assured switching distance "OFF", lateral: 15 mm

Mechanical data

Hysteresis (Switching distance), maximum: 2 mm
Repeat accuracy R: 0.5 mm

Accessory

Recommendation (actuator): RST260-1

Approvals - Standards

Certificates: TÜV | cULus | ASi-SaW | FCC

Status indication

Note (LED switching conditions display): (1) green/red LED (AS-i Duo LED):Supply voltage / communication error / slave address = 0 / periphery error detected / Tamper protection time active | (2) yellow LED: device condition (enabling status) / hysteresis signal / device error